QWD 754-0467 Lower Drive Belt 90.80" x 0.66" for MTD/Cub Cadet/Troy-Bilt/Toro, Replaces 954-0467A 754-0467 754-0467A 112-0301 CMXGZAM501035, Fits Bronco/TB42 & Toro LX Series, Neoprene Aramid Cord

What It Is

This is a replacement lower drive belt (90.80" x 0.66") for select MTD, Cub Cadet, Troy-Bilt, and Toro lawn tractors. It transfers power from the engine pulley to the transmission or deck, commonly used on Bronco/TB42 models and Toro LX Series.

Fitment & Compatibility

• Check your model number – fits Bronco (e.g., 13A226JD099), TB42 (e.g., 13AP91XS009), and Toro LX (e.g., LX460, LX500) series. Confirm your specific model on the manufacturer’s site or with your serial number.
• Measure your old belt – must be 90.80" long (outside circumference) and 0.66" wide. If yours differs, this won’t fit.
• OEM cross-refs – replaces 954-0467A, 754-0467A, 112-0301, and CMXGZAM501035. Not a direct match for all MTD/Cub Cadet models – always verify.
• Deck size note – typically for 42" or 46" decks, but not all. Double-check your deck size and belt routing diagram.

Key Things to Know

• Quality – Neoprene with aramid cord is a step above standard rubber belts; resists heat and stretching better. Good for heavy use.
• Install difficulty – Moderate. You’ll need to remove the deck or belt guards, release tension via idler pulley, and route around pulleys. A diagram helps (check your manual or online).
• Common gotcha – Belt length is critical. A 90.80" belt fits tight; if your old belt was slightly longer, this may not engage properly. Also, ensure the belt isn’t twisted during install – it will fail quickly.
• Torque spec – After install, run the deck at full throttle for 30 seconds, then re-check belt tension. Idler pulley spring should keep it snug but not strained.

Should You Buy It

Yes, if you have a Bronco, TB42, or Toro LX that calls for a 90.80" x 0.66" belt and you want a durable upgrade over standard OEM rubber. Skip if your model uses a different length or you need a deck belt (this is a drive belt). Good value for the price.