Parts Camp Lawn Mower Blade Replaces Cub Cadet/MTD/Troy Bilt 942-04126-x, 942-04308-x, 942-0616-x, 942-0616A,742-0616 for 42 in. Cut MTD, Cub Cadet, Troy-Bilt, Craftsman(Set of 2)

What It Is

This is a set of two replacement mulching/bagging blades for 42-inch cut riding mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Designed for medium-duty residential use, they fit decks that originally used OEM part numbers 942-04126-x, 942-04308-x, 942-0616-x, 942-0616A, or 742-0616.

Fitment & Compatibility

Before buying, confirm these three things:

• Deck size: Your mower must have a 42-inch cutting deck (measured blade tip to blade tip).
• OEM cross-reference: This set replaces Cub Cadet/MTD/Troy-Bilt part numbers 942-04126-x, 942-04308-x, 942-0616-x, 942-0616A, and 742-0616. If your original blade has any of these numbers stamped on it, it fits.
• Physical specs: Each blade is 21.5 inches long, with a 1-inch center hole and a 0.5-inch offset. Measure your old blade’s length and center hole diameter to be sure—aftermarket blades can vary slightly in offset, which may affect lift and cut quality on some decks.

Common compatible models (not exhaustive): Cub Cadet LTX 1042, RZT 42; Troy-Bilt Pony, Bronco; MTD 42-inch decks on Yard Machines; Craftsman 42-inch decks with 6-speed or hydrostatic transmissions. If your mower has a 42-inch deck and uses any of the listed OEM part numbers, this set should work.

Key Things to Know

• Quality: Solid aftermarket steel with a painted finish. Sharp out of the box, but won’t hold an edge as long as premium hardened blades (e.g., Oregon or Gator). Expect to replace after 25–30 hours of cutting in normal conditions.
• Installation: Straightforward swap—same bolt pattern, no modifications needed. Use a torque wrench to 45–55 ft-lbs. The set includes no hardware; reuse your original bolts and washers.
• Common gotcha: These are mulching blades (curved, not straight). If you bag clippings, they work fine. If you side-discharge, they’ll leave a coarser cut than standard lift blades. Not ideal for wet grass—clumps easily.
• Balance: Some users report slight imbalance out of the box. Check balance with a blade balancer before installing—if off, file the heavy side slightly.

Should You Buy It

Yes, if you need a budget-friendly direct replacement for a worn OEM blade on a 42-inch MTD-family mower and don’t require premium longevity or a perfect factory finish. It’s a solid value for residential use, but skip it if you need high-lift performance for bagging or cutting tall, wet grass—spend extra on an Oregon or Gator blade instead.