Parts Camp 13x5.00-6 Pneumatic Tire and Wheel Replacement 13 Inch Lawn Mower Tire with 3/4" or 5/8" Bearing for Riding Mower Garden Tractor Lawn Mower Front Tires 2 Pack

What It Is

This is a set of two 13-inch pneumatic replacement tires mounted on steel rims, designed for the front axle of riding mowers and garden tractors. The 13x5.00-6 size is a common front tire spec for many residential and light-commercial zero-turn and lawn tractor models.

Fitment & Compatibility

Before buying, confirm three things: tire size, wheel diameter, and bearing bore. The tire is 13 inches tall, 5.00 inches wide, and fits a 6-inch rim. The wheel hub uses a 3/4" or 5/8" bearing – you must select the correct bore size for your mower’s front axle spindle. Common brands that use this tire include John Deere (100-series, X300/X500), Cub Cadet (LT/LX/XT series), Husqvarna, Troy-Bilt, and Craftsman. This is an aftermarket part, so it may not match OEM tread pattern exactly, but the dimensions are standard. Measure your existing tire’s height and rim diameter, and check your spindle shaft diameter (use a caliper if unsure) before ordering.

Key Things to Know

• Tread pattern varies: This tire uses a ribbed or turf-saver tread – fine for flat lawns, but not ideal for muddy or steep terrain.
• Bearing selection is critical: The 3/4" and 5/8" versions are not interchangeable. If your spindle is 5/8", do not buy the 3/4" bore.
• Installation is straightforward: No special tools needed – just a jack, socket wrench, and possibly a grease gun for the spindle. The wheel bolts directly to your mower’s hub.
• Air pressure matters: These are pneumatic tires, so check pressure before first use (typically 14–20 PSI). Overinflation can cause a rough ride; underinflation can damage the tire or rim.

Should You Buy It

Buy this if you need to replace worn or flat front tires on a standard riding mower or garden tractor and want a budget-friendly, ready-to-mount set. It’s a solid choice for flat, well-maintained lawns. Skip it if you need a heavy-duty, aggressive tread for rough or wet conditions, or if your spindle bore is something other than 3/4" or 5/8".