Parts 4 Outdoor Hardware Kit 1Pk for Bad Boy 018-0010-00 Deck Wheel Bolt CZT Outlaw ZT MZ Magnum Maverick

What It Is

This is a hardware kit (Part 4 Outdoor 018-0010-00) that includes the bolt, washer, and locknut needed to secure the deck wheel to Bad Boy zero-turn mowers. It’s a direct replacement for the OEM part on CZT, Outlaw, ZT, MZ, Magnum, and Maverick models.

Fitment & Compatibility

Before buying, confirm your Bad Boy model has the 3/8-16 x 1.25-inch bolt with a flange head and nylon locknut. This kit is specifically for the deck wheel (not the caster wheel or axle). Check your deck wheel hole diameter – it should be 3/8-inch. If your mower uses a different bolt size (e.g., 5/16 or 1/2 inch), this won’t fit. Cross-reference with your OEM part number 018-0010-00. Works on 48-inch, 54-inch, and 60-inch decks on the listed Bad Boy models.

Key Things to Know

• Quality: Grade 8 bolt and hardened washer – holds up well under vibration and deck stress.
• Installation: Simple – remove old bolt, slide washer and bolt through wheel, tighten nut to 20-25 ft-lbs. Use thread locker if you want extra security.
• Common gotcha: The nylon locknut is single-use; if you reuse it, it may loosen. Replace it each time.
• Kit includes: One bolt, one washer, one locknut. You may need multiple kits for all deck wheels.

Should You Buy It

Buy this if you need a direct, OEM-spec replacement for a worn or lost deck wheel bolt on a compatible Bad Boy ZT. It’s a solid value at $9.99 for a single wheel – but if you’re replacing all four, consider a multi-pack or sourcing individual hardware from a local fastener store for less.