Oregon 96-344 G3 Gator Blades for 52" Scag 48108, 481707, 481711, 482878

What It Is

This is a set of three Oregon G3 Gator mulching blades designed for 52-inch Scag mowers. They use a wave-style cutting edge to shred clippings into fine particles, ideal for lawn care operators who want to skip bagging and leave a clean, mulched finish.

Fitment & Compatibility

Before buying, confirm your mower deck is exactly 52 inches—measure from blade tip to blade tip across the deck. These blades fit Scag models using OEM part numbers 48108, 481707, 481711, and 482878. They are a direct aftermarket replacement for those specific Scag blades. Check the blade center hole diameter (must be 1-inch, common on Scag) and the overall length (should be approximately 20 inches each). Verify your spindle pattern (three-hole, 3-inch bolt circle) matches. Not compatible with other 52-inch decks from brands like John Deere or Toro without cross-referencing your OEM part number.

Key Things to Buy

• Quality: Oregon G3 blades are heat-treated for durability and hold an edge well, but they are not as thick as some OEM Scag blades—expect slightly faster wear if you cut rough or sandy turf daily.
• Installation: Straightforward bolt-on replacement if your spindle pattern matches. Use a torque wrench to tighten to 60-80 ft-lbs (check your manual). Keep blades sharp; dull G3s will tear grass rather than mulch cleanly.
• Common gotcha: The wave pattern can clog in wet, heavy grass—only use for dry or moderately damp conditions. Also, these blades may cause a slight vibration if your spindles are worn or bent; inspect spindles before installing.
• Performance: Excellent for fine mulching but not ideal for side-discharge or bagging—they are purpose-built for recirculating clippings under the deck.

Should You Buy It

If you need a high-quality, affordable mulching blade for a 52-inch Scag (models listed) and primarily cut dry, well-maintained turf, this is a solid upgrade over worn OEM blades. Avoid if you bag often, cut wet grass, or need maximum blade thickness for rocky terrain.