Oregon 93-010 High Lift Blades for 52" Wright Stander 71440005, 71440009

What It Is

The Oregon 93-010 is a set of three high-lift blades designed for 52-inch Wright Stander zero-turn mowers (models 71440005 and 71440009). High-lift blades create stronger upward airflow to lift grass before cutting, making them ideal for bagging or collecting clippings in heavy or wet conditions.

Fitment & Compatibility

Before buying, verify your Wright Stander has a 52-inch deck and matches model numbers 71440005 or 71440009. These are aftermarket replacements for OEM Wright blades. Check your current blade length, center hole diameter, and drive hole pattern—Oregon 93-010 blades measure 18 inches long, have a 1-inch center hole, and a 5-point star drive pattern. Measure your existing blade to confirm. These will not fit other deck sizes (e.g., 36", 48", 61") or other brands without adapters.

Key Things to Know

• Higher lift = more power draw. High-lift blades increase engine load and vibration. Ensure your mower’s engine and belt are in good condition to handle the extra stress.
• Installation tip: Torque blade bolts to manufacturer spec (typically 70-90 ft-lbs). Use a torque wrench—overtightening can strip bolts, undertightening can cause blade throw.
• Quality note: Oregon blades are heat-treated and hardened for durability, but they may wear faster than OEM if you mow over sandy or abrasive soil.
• Common gotcha: High-lift blades can create more dust and debris in dry conditions. They’re not ideal for mulching or side-discharge use.

Should You Buy It

Buy these if you primarily bag grass on a Wright Stander 52-inch deck and need maximum lift for thick or damp turf. Avoid if you mulch or side-discharge—standard or low-lift blades will give better cut quality and less wear on your mower.