Oregon 6PK 91-264 High Lift Blade for 60" Dixie Chopper 30227-60, Exmark 103-2530, Hustler 602771

What It Is

The Oregon 6PK 91-264 is a set of six high-lift lawn mower blades designed for 60-inch zero-turn mowers, specifically for Dixie Chopper, Exmark, and Hustler models. High-lift blades create a stronger vacuum under the deck, improving grass clipping discharge and bagging performance, making them ideal for tall or wet grass.

Fitment & Compatibility

Before buying, verify your mower’s deck size is exactly 60 inches (not 54” or 72”). This set fits:

• Dixie Chopper 30227-60
• Exmark 103-2530
• Hustler 602771

Check your mower’s OEM part number against the list above. Measure the blade length (should be ~20 inches) and center hole diameter (typically 1 inch). These are aftermarket replacements; confirm they match your spindle pattern (six-blade sets require three spindles with two blades each). Not compatible with non-zero-turn or smaller deck mowers.

Key Things to Know

• Quality: Oregon is a reputable aftermarket brand, but blades may be slightly thinner than OEM. Inspect for consistent sharpness and balance out of the box.
• Installation Difficulty: Moderate. You’ll need a torque wrench (specs: ~70-90 ft-lbs) and a blade removal tool. Mark blade orientation (upward lift edge) before removal.
• Common Gotchas: High-lift blades increase engine load and fuel consumption. Ensure your deck can handle the extra lift without clogging. Also, check blade bolts for wear—replace if damaged to prevent loosening.
• Performance: Excellent for bagging and side discharge, but may leave a rougher cut on manicured lawns compared to low-lift blades.

Should You Buy It

Buy this if you have a compatible 60” zero-turn and frequently cut thick, tall, or wet grass where bagging or strong discharge is a priority. Skip if you need a show-quality finish on a golf-course lawn or if your deck is not listed—fitment is specific. For $61.99, it’s a solid value for heavy-duty use.