Oregon 12PK 91-264 Mower Blades Replacement for 60" Dixie Chopper 30227-60 30227-60V A60227-60N, Exmark 613112 613250 633483 103-2530 103-0301, Toro 105-7718 105-7718-03 108-1114 108-1123

What It Is

This is a 12-pack of Oregon 91-264 replacement blades designed for 60" zero-turn mowers from Dixie Chopper, Exmark, and Toro. Each blade measures 18.5" long with a 1" center hole and 5/8" diameter pin hole, intended for high-volume commercial or residential cutting on large lawns.

Fitment & Compatibility

Before buying, verify your deck is exactly 60" and that your mower model is listed: Dixie Chopper 30227-60, 30227-60V, A60227-60N; Exmark 613112, 613250, 633483, 103-2530, 103-0301; Toro 105-7718, 105-7718-03, 108-1114, 108-1123. Also confirm your existing blades match the 18.5" length and 1" center hole—measure your current blade center hole to center of the outer hole (if applicable). These are aftermarket, not OEM, so check for slight offset differences in blade thickness or lift angle. Not for 48" or 72" decks.

Key Things to Know

• Quality: Oregon is a reputable aftermarket brand; these are heat-treated steel with hardened edges. Expect comparable durability to OEM but at a lower per-blade cost.
• Installation: Requires a 5/8" socket or wrench for the blade bolt. Torque to 70-90 ft-lbs. Use a blade balancer after installation—out-of-balance blades cause vibration and spindle wear.
• Common gotcha: The 12-pack is bulk; blades may have minor coating variations or burrs on edges. Deburr with a file if needed. Do not mix with OEM blades on the same deck—match all four blades.
• Lift: These are standard lift, not high-lift. Fine for most grass but may leave clippings on wet or tall grass.

Should You Buy It

Buy if you own a compatible 60" zero-turn and want a cost-effective bulk supply for regular blade changes (every 25–50 hours). Ideal for commercial operators or homeowners with large properties who prefer aftermarket quality without OEM markup. Skip if you need high-lift blades for mulching or bagging, or if your deck uses a different spindle pattern.