MZREXN 15x6.00-6 Lawn Mower Tires and Wheel Assembly, Front Tires Replacement, Compatible with John Deere & More Riding Mowers, Lawn Tractors, 4 Ply Pneumatic, 3" Centered Hub, 3/4" Bearings, 2PCS

What It Is

This is a set of two front tire and wheel assemblies (15x6.00-6, 4-ply pneumatic) designed for riding mowers and lawn tractors, including many John Deere models. They replace worn or damaged front tires with a complete wheel hub assembly—no mounting or balancing needed.

Fitment & Compatibility

Before buying, verify these three things:

• Tire size: Must be 15x6.00-6 (15" diameter, 6" wide, 6" rim). Measure your current tire’s sidewall markings.
• Hub center: 3" centered hub with 3/4" inner bearings. Measure your spindle diameter—must be 3/4". If your mower uses a different bearing size (e.g., 5/8" or 1"), this won’t fit.
• Bolt pattern: The wheel has a 3" centered hub (no offset). Check that your mower’s front axle uses a centered hub design, not offset. Common compatible models include John Deere D100, D110, D130, LA105, LA115, LA125, LA135, LA145, and many similar lawn tractors from Craftsman, Husqvarna, and MTD. Always cross-check your mower’s model number with the seller’s list.

Key Things to Know

• Installation difficulty: Easy—removes with a socket and wrench. No tire mounting required. Just swap the old assembly, tighten the axle nut, and you’re done.
• Quality: 4-ply pneumatic tires handle moderate lawn use well but aren’t meant for heavy off-road or rocky terrain. The rubber is standard-duty; expect 2-3 seasons under normal mowing.
• Common gotcha: The 3/4" bearings are a snug fit. If your spindle is slightly worn or has rust, you may need to clean it or use a light lubricant to slide the wheel on. Also, check that the valve stem clears your mower’s frame—some tight-spindle designs require a low-profile stem.
• Pair only: This is a two-pack for front tires. Rear tires are typically larger (e.g., 18x8.50-8 or 20x10-8) and not included.

Should You Buy It

Buy this if you need a straightforward, affordable front tire replacement for a common riding mower with 3/4" spindles and a centered hub. It’s a good value for light-to-moderate residential use, but skip it if your mower uses offset hubs, smaller bearings, or if you need heavy-duty puncture-resistant tires for rough terrain.