MR MOWER PARTS Lawn Mower Wheel for Snapper # 3-5726, 4-4743, 7035726, 7035726YP Steel Wheel 10" x 1.75" Drive Wheel

What It Is

This is a 10-inch diameter, 1.75-inch wide steel drive wheel designed for rear-engine riding mowers, primarily Snapper models. It replaces OEM part numbers 3-5726, 4-4743, 7035726, and 7035726YP, and is the wheel that transfers power from the transmission to the ground.

Fitment & Compatibility

Before buying, check these three things:

• OEM numbers: Confirmed fits Snapper part #s 3-5726, 4-4743, 7035726, and 7035726YP. Cross-reference with your mower’s parts diagram.
• Physical dimensions: Must be exactly 10" x 1.75". Measure your old wheel’s diameter and width (rim edge to rim edge). The bolt pattern is a 4-bolt design on a 3.5-inch center.
• Deck size: Typically fits Snapper rear-engine riders with 28-33 inch decks (models like 2800, 3300 series). Does not fit zero-turn or push mowers.

If your mower uses a different bolt pattern or a 2-inch wide tire, this wheel will not work.

Key Things to Know

• Steel vs. plastic: This is a steel rim with a pneumatic tire. It holds up better than plastic on rough terrain but is heavier.
• Installation: Straightforward – remove the old wheel, clean the axle, and bolt the new one on. You’ll need a 1/2-inch or 9/16-inch socket. Torque to 35-45 ft-lb.
• Common gotcha: The valve stem can be fragile. Don’t over-inflate; keep tire pressure at 20-25 PSI max. Over-inflation can blow the bead or crack the rim.
• Tire included: Yes, the tire is mounted and inflated. No separate tire purchase needed.

Should You Buy It

Buy this if you own a Snapper rear-engine rider with a 10" x 1.75" drive wheel and need a direct, steel replacement that matches OEM specs. It’s a solid mid-range option – not the cheapest, but reliable for residential mowing. Avoid if you need a 2-inch wide tire or a plastic wheel for lighter duty.