MowerPartsGroup (2) Turf Tire Assemblies 18x8.50-10 Fits Wright Stander Intensity 36" - 42"

What It Is

This is a set of two 18x8.50-10 turf tire assemblies (rim + tire) designed for zero-turn mowers, specifically the Wright Stander Intensity models with 36" to 42" decks. It’s a direct replacement for worn or damaged front tires on commercial or residential mowers that use this tire size.

Fitment & Compatibility

Before buying, verify these three things:

• Machine model: Confirmed fit for Wright Stander Intensity 36", 38", 42", and 48" models. Also fits many other zero-turn mowers using 18x8.50-10 tires (e.g., some Scag, Toro, Gravely) but check your owner’s manual.
• Tire size: Must be 18x8.50-10 (outer diameter 18", width 8.5", rim diameter 10"). Measure your current tire if unsure.
• Bolt pattern & hub: These use a 4-bolt wheel pattern. Verify your mower’s hub bolt pattern (typically 4 on 4" or 4 on 5.5" – measure center-to-center on opposite bolts). Also confirm the center hole diameter matches your spindle.

This is an aftermarket assembly, not OEM Wright. It’s a common replacement option at a lower price than OEM, but quality may vary.

Key Things to Know

• Quality: MowerPartsGroup tires are budget-friendly. Expect decent tread life for residential or light commercial use, but not the same longevity as premium brands (e.g., Carlisle, Kenda).
• Installation: Typically bolt-on with no modifications needed if fitment matches. Use a torque wrench to tighten lug nuts to manufacturer specs (usually 30-50 ft-lbs). Check for clearance with deck and frame after mounting.
• Common gotchas: The 4-bolt pattern may not match all Wright models – always measure. Some users report slight vibration at high speeds; balance the assembly if needed. Also verify the rim offset matches your original – wrong offset can cause rubbing.
• Pressure: Inflate to 12-18 PSI for turf (check sidewall). Overinflation reduces traction and can cause a harsh ride.

Should You Buy It

Buy this if you need a budget-friendly, direct replacement for worn 18x8.50-10 turf tires on a Wright Stander Intensity or compatible zero-turn, and you’re comfortable with aftermarket quality. Skip it if you need OEM-grade durability for daily commercial use or if your bolt pattern doesn’t match – measure first.