MAXROLLORS (2 Pack) 15x6.00-6 Tubeless Front Tire and Wheel, 3/4"& Extra 5/8" Bearings, 3" Offset Hub, 4-Ply, Compatible with 100 and 300 Series John Deere Riding Mowers

What It Is

This is a set of two 15x6.00-6 tubeless front tires mounted on 3-inch offset hubs, designed to replace worn or damaged front wheels on John Deere 100 and 300 Series riding mowers. They come with both 3/4-inch and 5/8-inch bearings to fit different spindle sizes.

Fitment & Compatibility

• Check your spindle diameter: These wheels include two bearing options: 3/4” and 5/8”. Measure your front axle spindle before buying—most 100 Series (e.g., D100, D110, D120) use 3/4”, while some 300 Series (e.g., X300, X304) use 5/8”.
• Model range: Compatible with John Deere 100 Series (D100–D170) and 300 Series (X300, X304, X310, X320, X324, X340, X360). Not for older or 700 Series mowers.
• Offset: 3-inch offset hub matches OEM John Deere front wheel geometry. Verify your current wheel’s offset by measuring from mounting face to rim center.
• Tire size: 15x6.00-6 (same as 15x6-6). Check your existing tire sidewall for this size.
• OEM replacement: Aftermarket, not John Deere branded. Fits models originally using OEM part numbers GY20797, GY20570, GY20987, or AM137382.

Key Things to Know

• 4-ply rating: Good for residential use on turf and hard ground. Not for heavy commercial duty or rough terrain.
• Installation: Direct bolt-on if your spindle matches the bearing size. Use the supplied bearing sleeve or bushing if your spindle is smaller than the bearing bore.
• Tubeless design: No tube needed; seal bead to rim. Check rim for damage before mounting if reusing old tires.
• Common gotcha: These wheels are wider than some OEM steel wheels. Ensure they clear your mower’s front axle and deck when turned fully left/right.

Should You Buy It

If you own a John Deere 100 or 300 Series mower with worn or bent front wheels and want a durable, affordable replacement that bolts on without modifications, this set is a solid choice. Just confirm your spindle size and offset first. Avoid if you need OEM-branded parts or have a non-Deere mower.