Marastar 15x6.00-6 Pneumatic, OEM Like Replacement Front Tire and Wheel Assembly, Compatible with John Deere Mowers, Turf Saver, 4PR Tube-Type Tire, Yellow Wheel, 3-Inch Offset Hub, 3/4-Inch Bushings

What It Is

The Marastar 15x6.00-6 pneumatic front tire and wheel assembly is an OEM-like replacement designed for John Deere lawn mowers. It’s a complete unit (tire mounted on a yellow wheel) with a 3-inch offset hub and 3/4-inch bushings, ideal for residential turf and zero-turn mowers needing a durable, turf-friendly front tire.

Fitment & Compatibility

Before buying, verify these three things:

• Tire size: Must be 15x6.00-6 (diameter 15 in, width 6 in, rim 6 in). Measure your current tire or check your mower’s manual.
• Hub offset: This wheel has a 3-inch offset (hub center to mounting face). Measure your old wheel’s offset; mismatched offset can cause steering issues or rubbing.
• Bushing size: Comes with 3/4-inch bushings. If your mower axle is 5/8 in or 1 in, you’ll need different bushings (not included). Common John Deere models include 100, 200, 300 series, X300, X500, Z425, Z445, Z465, and Z645. Not compatible with zero-turn models using a 4-inch offset hub or 1-inch axle without bushing swap.

Key Things to Know

• Tube-type tire: This uses an inner tube (included). Do not run tubeless—seal will fail. Check tube valve stem alignment during installation.
• Build quality: 4-ply rating (4PR) provides good puncture resistance for light-to-medium use but isn’t heavy-duty for rough terrain. Yellow wheel matches John Deere’s factory color but may fade slightly over time.
• Installation: Simple bolt-on if axle size matches. No special tools needed. Torque lug nuts to 30-40 ft-lbs. If bushings don’t fit, buy a bushing set separately (cheap and widely available).
• Common gotcha: Offset difference causes steering wobble on some ZT models. Always compare old vs. new offset before mounting.

Should You Buy It

Yes, if you need a reliable, budget-friendly front tire for a John Deere lawn tractor or ZT mower with a 3-inch offset hub and 3/4-inch axle. It’s a solid OEM alternative for residential use, with good turf protection and easy installation. Skip it if your mower requires a 4-inch offset, 1-inch axle, or heavy-duty 6-ply tires for commercial or rocky terrain.