LIZAPUS Recoil Rewind Pull Starter kit Assembly Compatible with GTS 150cc Toro Lawn Mower Model# 21442

What It Is

This is an aftermarket recoil rewind pull starter assembly designed to replace a broken or worn-out starter on Toro lawn mowers powered by a GTS 150cc engine. It’s the part you pull to crank the engine, and it includes the rope, pulley, spring, and housing.

Fitment & Compatibility

• Primary fit: Toro model #21442 with a GTS 150cc engine. Also fits other Toro mowers using the same GTS 150cc engine, but always verify by checking your engine model, not just the mower deck model.
• OEM cross-reference: Replaces Toro part #131-6395. If your current starter has that number, this should bolt on.
• Measurements: The housing diameter is approximately 4.5 inches. The mounting bolt pattern is a standard 3-hole design on 3-inch centers. Measure your old starter’s bolt spacing before ordering.
• What to check: Confirm your engine is a GTS 150cc (look for a sticker or stamped number on the engine shroud or valve cover). Also confirm you have enough clearance around the starter for the housing depth (about 2 inches).

Key Things to Know

• Quality vs. OEM: This is an aftermarket part, not a Toro OEM. Expect slightly thinner plastic housing and a rope that may fray faster than the original. It works, but may not last as long.
• Installation difficulty: Moderate. You’ll need a socket set and a flathead screwdriver. The hardest part is winding the spring correctly—take a photo of the old spring orientation before removal.
• Common issues: The rope may be slightly shorter (about 2 inches less than OEM), which can make the pull angle awkward if the handle sits too low. Some users report the spring tension is weaker, so the rope doesn’t retract as snappily.
• Return policy: Check the seller’s return window. If it doesn’t fit, you’ll want to return it quickly—some sellers charge restocking fees on aftermarket parts.

Should You Buy It

If you need a cheap, quick fix for a dead starter on your Toro GTS 150cc mower and you’re comfortable with a bit of DIY, this will get you mowing again. But if you want a part that feels as solid as the original and lasts multiple seasons, save up for the OEM Toro starter assembly instead.