Lawn Mower Drive Wheels Set - 2 Rear Wheels 42710-VE2-M02ZE & 2 Front Wheels 44710-VL0-L02ZB - Compatible with H onda HRR216 HRS216 HRT216 Walk-behind Lawn Mower - Pack of 4

What It Is

This is a complete 4-wheel replacement set (2 rear, 2 front) for Honda HRR216, HRS216, and HRT216 walk-behind mowers. It’s designed to replace worn, cracked, or flat-spotted OEM wheels on residential push mowers, restoring traction and maneuverability.

Fitment & Compatibility

Before buying, confirm your mower model matches one of these: HRR216 (all variants like VKA, VLA), HRS216, or HRT216. Check your deck size (usually 21 inches) and wheel bolt pattern—these use a standard 5/16-inch axle hole. Measure your existing wheel diameter: rear wheels (42710-VE2-M02ZE) are roughly 8 inches, front wheels (44710-VL0-L02ZB) about 7 inches. If your mower uses different axle clips or washers, reuse your originals. These are aftermarket replacements, not OEM Honda parts, so expect slight cosmetic differences in tread pattern or plastic texture.

Key Things to Know

• Build quality: Hard plastic wheels with rubber-like tread; adequate for flat lawns but may slip on wet grass or steep slopes. Not as durable as OEM Honda wheels.
• Installation: Easy—remove the axle clip, pull old wheel, slide on new one, reinstall clip. No tools needed beyond a flathead screwdriver for stubborn clips.
• Common gotcha: The axle hole can be tight on some mowers; a light sanding or lubricant may help. Rear wheels are wider than front—don’t mix them up.
• Tread difference: Tread pattern is simpler than OEM; expect slightly less grip on loose soil or damp turf.

Should You Buy It

If your Honda HRR216/HRS216/HRT216 wheels are cracked or the tread is bald and you want a budget-friendly fix, this set works. It’s best for flat, dry lawns and light-duty mowing. For heavy use, hills, or wet grass, consider OEM wheels for better traction and longevity.