Lawn Mower Drive Belt Replace 954-05001 754-05001 for Troy Bilt TB30R Craftsman R1000 R110 Cub Cadet CC30 Replacement Part Accessories, 1/2 Inch x 43.5 Inch

What It Is

This is a replacement drive belt (1/2 inch wide, 43.5 inches long) for select Troy-Bilt, Craftsman, and Cub Cadet riding mowers with a 30-inch deck. It transfers power from the engine pulley to the transmission, enabling forward/reverse movement.

Fitment & Compatibility

Before buying, confirm three things:

1. Model number – fits Troy-Bilt TB30R, Craftsman R1000/R110, Cub Cadet CC30, and similar 30-inch deck riders. Check your owner’s manual or deck sticker.
2. Belt dimensions – must be exactly 1/2-inch wide x 43.5 inches long. Measure your old belt if possible; slight variations can cause slipping or poor engagement.
3. OEM cross-reference – replaces OEM numbers 954-05001 and 754-05001. This is an aftermarket part, not genuine Cub Cadet/Craftsman.

Not compatible with zero-turn mowers, tractors with different deck sizes, or any model using a longer/shorter belt.

Key Things to Know

• Quality is acceptable for the price – users report it lasts about 1–2 seasons under normal use, but may wear faster than OEM belts if you mow thick, wet grass.
• Installation is moderate difficulty – requires removing the deck or belt guard, routing around pulleys, and using a tensioner tool. A new belt may feel tight initially; don’t force it.
• Common gotcha – if your mower struggles to move or the belt slips after installation, the tensioner spring or pulley may be worn. Replace those too for best results.
• Measure twice – some users received belts slightly off-spec (too short or too long). Compare to your old belt before installing.

Should You Buy It

Buy this if you need a budget-friendly replacement for a Troy-Bilt, Craftsman, or Cub Cadet 30-inch deck rider and you’re comfortable with moderate DIY repair. It’s not the longest-lasting option, but for $10 it’s a solid stopgap. If you mow heavily or want maximum durability, spend more on a genuine OEM belt.