Lawn Mower Brake Cable 112-8818 for Toro Recycler 22" 20330 20331 20338 20339 20350 Walk-Behind Lawn Mowers fits Toro Recycler 20" 20314 20316 20318 20323 Lawn Mower Throttle Cable

What It Is

This is a genuine Toro brake cable (part number 112-8818) that engages the blade brake when you release the handlebar bail. It’s designed for Toro Recycler 22" walk-behind mowers (models 20330, 20331, 20338, 20339, 20350) and also fits certain 20" Recycler models (20314, 20316, 20318, 20323). It serves as both a brake cable and throttle cable on compatible units.

Fitment & Compatibility

• Check your model number: Confirm your mower’s model number is one of the listed ones (e.g., 20330, 20331, etc.). Do not rely on deck size alone—some 22" Recyclers use a different cable.
• OEM vs aftermarket: This is a genuine Toro part, so it matches factory specs exactly. Aftermarket cables may be shorter or have different end fittings, causing poor brake engagement.
• Cable length: Measure your old cable end-to-end (including fittings). The 112-8818 is approximately 42 inches long. Verify this matches your mower’s routing path.
• Fitting type: Both ends use a barrel-style connector. Make sure your handlebar bail and brake arm accept barrel fittings (not hook or loop ends).

Key Things to Know

• Installation difficulty: Moderate—requires removing the handlebar cover, disconnecting the old cable from the bail and brake arm, and routing the new cable through the same path. Basic hand tools (screwdriver, pliers) are needed.
• Common gotcha: The cable can kink if not routed smoothly. Avoid sharp bends, especially near the handlebar pivot, or the brake won’t fully release.
• Quality: Genuine Toro cable has a durable plastic sheath and stainless steel inner wire. It resists rust better than cheap aftermarket cables.
• Fitment note: This cable also works as a throttle cable on some Toro Recycler models, but verify your mower’s throttle linkage matches before using it that way.

Should You Buy It

If your Toro Recycler’s blade brake is sluggish or won’t engage, and your model number is listed, this is the correct OEM replacement. It’s affordable, well-reviewed, and eliminates the guesswork of generic cables. Skip it only if you have a different brand or an older Toro with a non-standard cable routing.