KIKITE Recoil Starter Assembly 593959 Compatible with Briggs and Stratton 591139 Recoil Pull Start 590588 595355 Rewind Starter 450E 500E 550E 08P502 093J02 Engine TB110 TB200 140cc Lawn Mower Parts

What It Is

This is a replacement recoil starter assembly for small Briggs & Stratton engines (140cc class) used on walk-behind mowers like the Troy-Bilt TB110, TB200, and similar models. It replaces the factory pull-start mechanism when the rope breaks, spring fails, or pawls wear out.

Fitment & Compatibility

Check your engine’s model number – not the mower deck size. This starter fits Briggs & Stratton engines with model numbers 08P502, 093J02, 450E, 500E, and 550E. It replaces OEM part numbers 593959, 591139, 590588, and 595355.

Do not rely on mower brand alone – this part is engine-specific, not mower-specific. It works on Troy-Bilt TB110/TB200, but only if they use one of the listed Briggs engines. Measure the bolt hole spacing (typically 3.25 inches center-to-center) and the starter housing diameter (roughly 4.5 inches) to confirm fit.

Aftermarket note: This is a non-OEM replacement. It should match the original dimensions, but some users report slightly different spring tension or bolt hole alignment. Have the old starter on hand to compare.

Key Things to Know

• Installation is straightforward – usually 2-4 bolts and a rope guide. No special tools required, but a socket set and flathead screwdriver help.
• Rope length and thickness – verify the rope is 3/16 inch diameter and long enough (typically 60-72 inches). Some users find the included rope slightly short for full extension.
• Spring tension adjustment – if the recoil feels weak or binds, the spring may need pre-tensioning. Follow the manual: wind the rope fully, then back off 1/4 turn.
• Common gotcha – the plastic housing can crack if over-tightened. Use hand-tight plus a quarter turn; do not torque with a power tool.

Should You Buy It

Yes, if your Briggs 140cc engine’s recoil starter is broken and you want a budget-friendly fix. It’s a good value for DIYers who can confirm fitment by engine model number and don’t mind a 10-minute install. Skip it if you need OEM exactness for a commercial mower or if your engine model isn’t listed.