JEENDA Electric Blade PTO Clutch AM126100 Compatible with John Deere Warner Husqvarna Poulan LX255 LX266 LX277 GT225 GT235 GT235E GT245 GX255 LT190 LX279 LX280 LX288 LX289 SST15 SST16 SST18 Tractor

What It Is

The JEENDA Electric Blade PTO Clutch AM126100 is an aftermarket replacement part that engages and disengages the mower blades via an electric clutch. It is designed for a wide range of John Deere, Husqvarna, Poulan, and other lawn tractors, specifically models like the LX255, LX266, GT225, GT235, and SST15-SST18 series.

Fitment & Compatibility

Before buying, confirm your tractor’s model number and deck size (typically 42–54 inches). The AM126100 is an OEM cross-reference for John Deere part AM126100 and also fits Warner, Husqvarna, and Poulan units with the same electrical and mechanical specs. Measure your existing clutch’s bolt pattern (usually 4-bolt, 3-inch spacing) and shaft diameter (typically 1 inch). Check that your battery voltage is 12V and that the wiring harness matches (two-wire, female spade connectors). This clutch is aftermarket, so verify it physically matches your original—especially the pulley groove width and overall thickness.

Key Things to Know

• Quality: Rated 4.8/5 from 27 reviews—users report reliable engagement and good build for the price, but it’s not OEM, so expect slightly different materials (e.g., lighter housing).
• Installation: Moderate difficulty—requires basic tools (wrenches, multimeter) and safe lifting of the tractor. You’ll need to remove the old clutch, check the air gap (0.012–0.025 inches), and torque the center bolt to spec (typically 40–50 ft-lbs).
• Common Gotchas: Wiring polarity matters—reverse it and the clutch won’t engage. Also, the pulley may sit slightly higher or lower than OEM, which could affect belt alignment on some decks. Test before full reassembly.
• Compatibility: Not all models listed are guaranteed—double-check your specific model’s PTO clutch part number (e.g., AM126100) in the owner’s manual.

Should You Buy It

Buy this if you need a cost-effective replacement for a failing OEM clutch on a compatible John Deere, Husqvarna, or Poulan tractor and are comfortable with a straightforward DIY install. It’s a solid value at $125.99 compared to OEM prices ($200+), but skip it if you require exact OEM durability or have a rare model not explicitly listed—stick with the original for guaranteed fit.