ILONPA 48111 482879 61 inch 5-Star High Lift Toothed Blades for Scag Ferris Husqvarna BZ 6127 BZ 7234 Turf Tiger Freedom Z 61'' Deck Cut Zero-Turn Mower 539101733 539102093, Blue

What It Is

The ILONPA 48111 482879 61-inch 5-Star High Lift Toothed Blades are aftermarket replacement blades designed for zero-turn mowers with a 61-inch cutting deck. They use a high-lift profile and toothed edge to improve grass clipping discharge and mulching performance, especially in thick or wet grass.

Fitment & Compatibility

• Deck size: Must be a 61-inch cutting deck. Measure your deck width before buying—this blade only fits 61" models.
• Compatible brands/models: Fits Scag (Turf Tiger, Freedom Z), Ferris (BZ 6127, BZ 7234), Husqvarna (BZ 6127, BZ 7234), and other zero-turn mowers using a 61" deck. Check your mower’s OEM part number against 539101733 or 539102093.
• OEM vs aftermarket: This is an aftermarket blade. It matches OEM dimensions but is not a Husqvarna or Scag factory part. Verify bolt pattern and center hole size (typically 5/8” or 3/4”) before installing.
• Measurements: Blade length is 61 inches overall. Confirm your existing blade length and mounting hole diameter—some models may vary.

Key Things to Know

• High lift = more power draw: The aggressive lift and toothed design require more engine power. If your mower is underpowered or you mow very tall grass, it may bog down.
• Installation difficulty: Easy—just remove the old blade, clean the spindle, and torque to spec (usually 70–90 ft-lbs). Use a blade removal tool or block wood to prevent spinning.
• Balance check: Always balance new blades before installation. Unbalanced blades cause vibration, poor cut quality, and spindle wear.
• Wear life: Toothed blades dull faster than standard blades, especially on sandy or rocky lawns. Expect to sharpen or replace more often than OEM flat blades.

Should You Buy It

Buy these if you mow thick, damp, or tall grass with a 61-inch zero-turn and want better discharge and mulching. They’re a good budget alternative to OEM high-lift blades, but skip them if you mow clean, dry lawns—standard blades will last longer and cost less.