ILONPA 48111 482879 61 inch 5-Star High Lift Toothed Blades for Scag Ferris Husqvarna BZ 6127 BZ 7234 Turf Tiger Freedom Z 61'' Deck Cut Zero-Turn Mower 539101733 539102093, Black

What It Is

The ILONPA 48111/482879 61-inch 5-Star High Lift Toothed Blades are aftermarket replacement blades designed for zero-turn mowers with a 61-inch deck, optimized for high-lift grass discharge and mulching on commercial and residential properties.

Fitment & Compatibility

• Deck size: 61-inch cutting deck only – verify your deck measures exactly 61 inches (some “61-inch” decks may vary by brand).
• Model fit: Compatible with Scag (Turf Tiger, Freedom Z, Cheetah), Ferris (IS 5100Z, IS 7000Z), Husqvarna (BZ 6127, BZ 7234), and other zero-turns using a 5-star spindle pattern.
• OEM cross-references: Replaces Husqvarna 539101733, 539102093; Scag 48111, 482879; and Ferris equivalents. Not OEM – measure before installing.
• Key measurements: Blade length 20.5 inches, center hole 5/8 inch, 5-point star drive pattern. Check your spindle’s star pattern matches exactly (some older decks use a 6-point star).
• What to check: Measure your existing blade length and center hole diameter. Confirm your spindle’s star pattern count (5-point vs. 6-point). Verify blade thickness (these are 0.25 inch) clears your deck shell.

Key Things to Know

• High lift vs. standard: These blades create more suction for bagging and side discharge but increase engine load and wear – expect slightly lower fuel efficiency.
• Installation difficulty: Moderate. Requires a torque wrench (45-55 ft-lbs), a blade removal tool, and jack stands – never work under a raised mower without supports.
• Toothed edge: The serrated teeth help shred leaves and thick grass but dull faster than smooth blades on sandy soil or rocky terrain.
• Balance check: Out of balance blades can cause vibration and spindle damage. Always balance after sharpening – these come pre-balanced.

Should You Buy It

Buy these if you need a cost-effective, high-lift replacement for a 61-inch zero-turn deck and primarily mow thick grass or leaves. Skip them if you mow sandy or debris-heavy areas (teeth dull quickly) or need a low-lift blade for dry-season mulching. For commercial use, expect 20-30 hours of sharp life depending on conditions.