HQPASFY 2105300125A Lawn Mower Blade, Fit for MNA152505 MNA152701, Blade Compatible with Hyper Tough 20" Lawn Mower Deck, 2 Pack

What It Is

This is a 2-pack of 20-inch replacement blades for Hyper Tough walk-behind mowers, designed to cut grass on residential lawns. It fits specific Hyper Tough models (MNA152505, MNA152701) and uses the universal “star” or “bow-tie” center hole pattern.

Fitment & Compatibility

Before buying, confirm these three things:

1. Deck size: Blade length must be exactly 20 inches (measure from tip to tip, diagonally). This blade only works on 20-inch decks.
2. Center hole pattern: This uses a 5-point star (also called a “bow-tie”) pattern. Measure your old blade’s center hole – if it’s a standard round or diamond hole, this won’t fit.
3. Model number: Listed as compatible with Hyper Tough MNA152505 and MNA152701. Check your mower’s model number (usually on a sticker under the deck or on the frame). It may fit other Hyper Tough 20-inch models with the same star center hole, but verify the blade shape matches your deck’s lift profile.

OEM vs aftermarket: This is a non-OEM (aftermarket) replacement. It should function identically to the original, but quality and balance can vary between brands.

Key Things to Know

• Installation difficulty: Easy – requires a socket wrench (usually 5/8-inch or 15mm) to remove the blade bolt. Always disconnect the spark plug and tip the mower with the carburetor side up to prevent oil leaks.
• Balance check: Aftermarket blades sometimes come slightly unbalanced. Test balance by hanging the blade on a nail or using a blade balancer – an unbalanced blade causes vibration and poor cut.
• Sharpness: Blades are typically not sharp out of the box. You may need to sharpen them before first use for a clean cut.
• Torque spec: Tighten the blade bolt to 40–50 ft-lb (check your mower manual). Over-tightening can strip the threads; under-tightening can cause the blade to fly off.

Should You Buy It

Buy this if you own a Hyper Tough 20-inch mower with a star-shaped center hole and want a budget-friendly 2-pack for quick replacement. Avoid if you need an exact OEM match, have a different deck size, or prefer blades that come pre-sharpened and balanced. For the price, it’s a solid value for routine blade swaps.