Honda Genuine OEM Harmony II HRR216 (HRR2163PDA) (HRR2163TDA) (HRR2163VXA) Walk-Behind Lawn Mowers Rotary Blade Set

What It Is

This is a genuine OEM rotary blade set for Honda Harmony II HRR216 walk-behind mowers, specifically designed for the HRR2163PDA, HRR2163TDA, and HRR2163VXA models. It replaces the factory blades to restore cutting performance on residential lawns.

Fitment & Compatibility

Before buying, verify your mower model number—this set fits only the HRR2163PDA, HRR2163TDA, and HRR2163VXA. Check your deck size: these blades are 21 inches long (standard for HRR216 series). They are OEM Honda parts, so no aftermarket adapters or modifications needed. Confirm your current blade part number (usually stamped on the blade) matches Honda part number 72511-VL0-L01 or 72511-VL0-L02. If your mower is an older HRR216 variant (e.g., HRR216K9), this set will not fit.

Key Things to Know

• Quality: Genuine Honda steel with heat-treated cutting edges—holds an edge longer than most aftermarket blades.
• Installation: Requires a 15mm socket and a torque wrench (spec is 35-45 ft-lbs). Use a blade stop or block of wood to prevent spinning.
• Common Gotcha: These are not universal; using them on a different HRR216 model (like the HRR216K9) can cause poor cutting or deck damage.
• Replacement Interval: Replace every 25 hours of use or when nicked/dull. Inspect the blade bolt and washer for wear each time.

Should You Buy It

Buy this if you own one of the listed HRR2163 models and want guaranteed fit, reliable cutting, and long blade life without guessing at aftermarket quality. It’s ideal for homeowners who value OEM precision over saving a few dollars. Skip it if your mower is a different HRR216 variant or you need a mulching/bagging blade set (this is a standard lift blade).