Honda Genuine 72511-VE1-020 & 72531-VE2-020 Mower Blade Set

What It Is

This is a genuine Honda OEM replacement blade set (two blades, part numbers 72511-VE1-020 and 72531-VE2-020) designed for select Honda HRX and HRS series walk-behind mowers. It provides a clean, efficient cut for residential lawn care.

Fitment & Compatibility

Before buying, confirm your mower model. This set fits Honda HRX217 (all sub-models like VKA, VLA, HMA, etc.) and HRS216 series mowers, typically with a 21-inch cutting deck. Check your owner’s manual or existing blade part numbers—these replace OEM blades only. Measure blade length: each blade is approximately 21 inches long, with a star-shaped center hole and two offset cutting edges. Not compatible with Honda mowers under 21 inches or non-Honda brands. Verify deck size is 21 inches and that your mower uses a two-blade system (common on HRX models). If you have a single-blade Honda (e.g., HRR216), this set will not fit.

Key Things to Buy

• Quality: Honda OEM blades are heat-treated and balanced for durability. They hold an edge longer than many aftermarket options, reducing sharpening frequency.
• Installation: Moderate difficulty—requires removing the center bolt (typically 15mm or 5/8-inch socket) and aligning the star pattern. Use a blade stopper or block wood to prevent spinning. Torque bolt to 35-45 ft-lbs.
• Common Gotchas: The blades are directional; the “cutting edge” arrow must face upward toward the deck. Reversing them causes poor cut and vibration. Also, the star hole may be tight on some spindles—clean the spindle before installation. Always replace both blades as a set for balance.
• Performance: These blades are “mulching” style with a curved design for fine clipping recirculation. Not ideal for bagging if you prefer large clippings—consider Honda’s optional bagging blade set (72511-VE2-020).

Should You Buy It

If you own a Honda HRX217 or HRS216 mower and want a guaranteed fit with OEM quality, this set is the right choice. It’s a premium option at $40.73, but the reliability and cut quality justify the cost for homeowners who value durability. Skip it if you need aftermarket blades for a different Honda model or prefer a non-OEM budget alternative.