Honda 2 Pack Genuine 72511-VE1-020 Mower Blade OEM

What It Is

This is a genuine Honda OEM replacement blade set (2-pack, part number 72511-VE1-020) designed for Honda HRX series mowers. It’s a high-lift blade that creates strong vacuum for superior grass collection and bagging performance.

Fitment & Compatibility

• Deck size: Fits Honda 21-inch steel decks (HRX217, HRX217HYA, HRX217HZA, HRX217VKA, HRX217VLA, HRX217VYA, HRX2174VKA, HRX2175VKA).
• OEM vs aftermarket: Genuine Honda—exact match for factory equipment. No adapter or modification needed.
• Measurements: Blade length is ~21.5 inches (center hole to tip), with a 1-inch center hole and 2.5-inch offset.
• Check your mower model: Look at the sticker under the seat or on the deck. If it’s an HRX217* series, these fit. Not compatible with HRR, HRS, or HRA decks.
• Torque spec: Tighten blade bolt to 36-43 ft-lbs (use a torque wrench—under-tightening causes wobble, over-tightening strips threads).

Key Things to Know

• Sharp out of the box: These come pre-sharpened, but re-sharpen after 10-15 hours of use for best cut.
• Installation is easy: One bolt per blade. Use a block of wood to lock the blade. Mark the blade orientation before removal—the “Honda” stamp faces away from the deck.
• Balance matters: Even genuine blades can be slightly off. Check balance on a simple blade balancer before installing. Unbalanced blades vibrate and damage the spindle.
• Common gotcha: The 2-pack is for a single mower (two blades). Don’t expect to use one now and one later—they’re identical and both needed at once.

Should You Buy It

Yes, if you own a Honda HRX217 mower and want the best bagging performance. The OEM blades last longer than cheap aftermarket options and maintain the factory cut quality. Skip if you have a different deck size or want a mulching blade—this is strictly a high-lift bagging blade.