Holdly 754-0241 Drive Belt 5/8 x 35'', Mower Belt for Craftsman T110 954-0241A Upper Drive Belt 754-0241A 9540241A 954-05040 754-0241-352, Kevlar Aramid Belt for MTD, Cub Cadet, Troy-Bilt

What It Is

The Holdly 754-0241 is a 5/8-inch wide by 35-inch long Kevlar-reinforced drive belt designed as an upper deck drive belt for select Craftsman T110 and other MTD-built lawn tractors. It transfers engine power to the mower deck blades, not the transmission.

Fitment & Compatibility

Direct OEM replacements: Craftsman 954-0241A, 754-0241A, 9540241A, 954-05040, 754-0241-352. Fits MTD, Cub Cadet, and Troy-Bilt models using the same upper deck belt routing.

Check before buying:

• Measure your old belt: this is exactly 35" outside length × 5/8" width. A 1/2" difference in length will cause slipping or belt throw.
• Verify deck size: typically fits 42" and 46" decks on T110, LT1000, LT1040, and similar.
• Confirm it’s the upper deck belt (between engine pulley and deck), not the lower (between deck spindles). These are often confused.
• Cross-reference your model number on MTD/ Cub Cadet parts diagrams—this is an aftermarket belt, not OEM, but matches OEM specs.

Key Things to Know

• Kevlar construction is a plus – resists stretching and heat better than standard rubber belts, but it’s stiffer. May need a brief break-in period (10–15 minutes of light use).
• Installation tip: Remove the deck from the tractor to access belt routing. Use a 1/2" socket to relieve tension on the idler pulley. Mark the belt’s travel direction before removal—install the new one the same way.
• Common gotcha: This belt is not for zero-turn mowers or older Craftsman models with different deck designs (e.g., 917-series). Check your deck’s belt routing diagram if the belt seems too tight or too loose.
• Price advantage: At $13.99, it’s roughly half the cost of OEM belts. The 4.3-star average from over 1,500 reviews suggests consistent quality, but some users report slightly shorter lifespan than OEM (1–2 seasons vs. 2–3).

Should You Buy It

If you own a Craftsman T110 or compatible MTD-built tractor and need a reliable upper deck belt without paying OEM prices, this is a solid budget choice. It’s best for DIY homeowners who mow a standard lawn (under 1 acre) and don’t mind replacing the belt every 1–2 seasons. Avoid it if you need a lower deck belt, have a non-MTD chassis, or want guaranteed OEM longevity for commercial use.