Hipa 532184588 145755 Drive Control Cable Replace 740193MA 184588 583134601 for Craftsman Lawn Mower Push Mower Walk-Behind Mower Throttle Cable Self Propelled Cable Parts

What It Is

This is a drive control cable that engages and disengages the self-propelled mechanism on Craftsman walk-behind mowers. It replaces the original cable when the existing one stretches, snaps, or becomes too stiff to operate the drive system smoothly.

Fitment & Compatibility

Check your mower’s model number (found under the seat or on the rear frame) against Craftsman models using OEM part numbers 532184588, 145755, 740193MA, 184588, or 583134601. This cable is designed for most Craftsman push mowers with a 6.5–7.25 ft-lb engine and a deck size between 21 and 22 inches. Measure your old cable end-to-end (including fittings) – it should be roughly 38–42 inches long. Verify the cable end fittings match your mower’s throttle lever and drive engagement bracket. It is an aftermarket replacement, not OEM Craftsman, so fit may vary on older or non-standard models.

Key Things to Know

• Quality variance: Some users report the cable is slightly shorter or the sheath is less flexible than OEM; you may need to adjust the cable tension after installation.
• Installation difficulty: Moderate. You’ll need basic hand tools (wrenches, pliers) and about 30 minutes. Routing the cable along the handlebar without kinking is the trickiest part.
• Common gotcha: The plastic adjustment barrel can crack if overtightened. Use gentle pressure when setting cable slack.
• Lubrication helps: Apply light oil to the inner cable before installation to reduce friction and extend life.

Should You Buy It

If your Craftsman self-propelled mower’s drive engagement is sluggish or the cable is clearly damaged, this is a budget-friendly fix that works for most common models. It’s not OEM quality, but at $20.99 it’s a solid option if you’re comfortable with minor adjustments and don’t mind a slightly stiffer pull than the original.