Heavy Duty Snow Plow Blade Edge Compatible with John Deere Sub-Compact Tractors Replaces M75674 (54 inch)

What It Is

This is a heavy-duty, 54-inch cutting edge for a snow plow blade, designed for John Deere sub-compact tractors (e.g., 1023E, 1025R, 2025R). It replaces OEM part M75674 and is used to scrape snow or light gravel without wearing down the blade itself.

Fitment & Compatibility

Before buying, confirm your tractor model is a John Deere sub-compact (not compact or utility) and that your plow blade is the 54-inch model (measure blade width across the bottom edge). This is an aftermarket replacement for OEM M75674—check that your plow’s bolt pattern matches (typically 3/8-inch bolts at 6-inch spacing on a 54-inch edge). Measure the existing edge thickness (this is 5/16-inch thick) and verify your mounting holes align. Not compatible with 60-inch or 48-inch blades.

Key Things to Know

• Steel grade: Made from AR400 abrasion-resistant steel, which is harder and longer-lasting than standard mild steel edges.
• Installation: Moderate difficulty—requires unbolting the old edge, scraping off rust/debris, and torquing bolts to spec (typically 30-40 ft-lbs). May need a socket set and penetrating oil if bolts are seized.
• Bolt kit: Often sold separately—check if your plow’s original bolts are reusable or if you need new ones (common size: 3/8-16 x 1-inch grade 5).
• Wear indicator: This edge is reversible—flip it over when one side wears down to double its life.

Should You Buy It

If you own a John Deere sub-compact with a 54-inch plow and need a tougher edge for frequent snow removal or abrasive surfaces (gravel, asphalt), this is a solid upgrade over OEM. The AR400 steel and reversible design offer good value at this price, but factor in possible bolt replacement and moderate DIY effort. It’s not for occasional light use—stick to a standard edge if you plow rarely.