GY22387 PTO Control Cable 78 Inch for John Deere D100 D110 E100 L100 X105 Riding Lawn Mower

What It Is

The GY22387 PTO control cable (78-inch length) engages and disengages the mower deck’s blade clutch on select John Deere lawn tractors. It replaces a worn or broken cable that prevents the blades from spinning when you pull the PTO knob.

Fitment & Compatibility

• Compatible models: John Deere D100, D110, E100, L100, X105 (and some similar models with a 78-inch cable route).
• Check before buying: Measure your existing cable’s full length (end to end, including fittings) – it must be 78 inches. Verify your deck size (typically 42 or 48 inches) and that the cable routing path matches. OEM part numbers include AM125290, AM137333, GY22387. This is a direct replacement for those OEMs but is an aftermarket part – fitment may vary slightly on older or modified decks.
• What to avoid: Do not assume all D100-series use the same cable – some use shorter (72-inch) or longer (84-inch) cables. Always compare the cable end fittings (clevis pins, ball joints, or flag-style) to your original.

Key Things to Know

• Quality concern: The single 1.0/5 rating suggests possible issues with fit, durability, or incorrect length – treat with caution. Aftermarket cables can be stiff or have slightly different end fittings.
• Installation difficulty: Moderate – requires removing the old cable from the PTO lever and deck clutch arm, routing the new cable through the frame, and adjusting tension. Expect 30-60 minutes.
• Common gotchas: The cable housing may be slightly thicker than OEM, making routing through tight spots tricky. You may need to bend or adjust the mounting bracket. Always test blade engagement before reassembling the dash.
• No return guarantee: Check the seller’s return policy – some aftermarket cables are non-returnable once opened.

Should You Buy It

Only if you’re on a tight budget and can verify the 78-inch length and end fittings match your existing cable exactly. The low rating suggests a high risk of poor fit or premature failure – consider spending a few dollars more for an OEM or higher-rated aftermarket cable (e.g., Stens, Oregon) to avoid frustration and downtime.