GICOOL 942-04244A Mower Blade for Cub Cadet Enduro XT1-46 XT2-46 ZT1-46 LT46 LX46 LTX1045 LTX1046 RZT46, Replace 942-04244A 942-04244 942-04290 742-04244, 6-Point Star, 2-Pack

What It Is

The GICOOL 942-04244A is a 2-pack of 6-point star mower blades designed as a direct replacement for Cub Cadet Enduro Series riding mowers with 46-inch decks. These are high-lift blades intended for bagging, mulching, and side-discharge cutting on residential and light commercial turf.

Fitment & Compatibility

Before buying, verify your mower has a 46-inch cutting deck and a 6-point star spindle mount (not a 5-point or oval hole). This blade fits Cub Cadet Enduro XT1-46, XT2-46, ZT1-46, LT46, LX46, LTX1045, LTX1046, and RZT46 models. It replaces OEM part numbers 942-04244A, 942-04244, 942-04290, and 742-04244. Measure your current blade: it must be 20.5 inches long, 3 inches wide, with a 0.25-inch thick center section. If your deck is 42 inches or 54 inches, this will not fit. Check your mower’s model number under the seat or in the manual—do not rely on brand name alone.

Key Things to Know

• Blade quality: These are aftermarket, heat-treated steel blades. They are slightly thinner (0.25 in) than some OEM blades (0.30 in), which can reduce lifting power in wet grass.
• Installation: You’ll need a torque wrench and a 15/16-inch socket. Torque the center bolt to 70–90 ft-lbs. The 6-point star alignment is forgiving but must seat fully—do not force it.
• Common gotcha: The blades may be slightly unbalanced out of the box. Check balance with a blade balancer before installing. A 1/8-inch offset in weight will cause vibration and poor cut.
• Durability: Expect 25–50 hours of cutting before sharpening, depending on lawn debris. They will chip on rocks and roots faster than OEM blades. Not for heavy-duty commercial use.

Should You Buy It

Buy this 2-pack if you own a 46-inch Cub Cadet Enduro and want a low-cost, functional replacement for bagging or mulching. It’s a good value for residential use, but skip it if you need maximum lift for wet grass or if your original blades are thicker. For heavy-duty or rocky lawns, stick with OEM Cub Cadet blades.