GICOOL 734-04581 634-0190A Lawn Mower Wheels, 8 Inch Wheels for MTD, Yard Man, Craftsman, Huskee, Yard Machines Self -Propelled Walk-Behind, 2 Pack

What It Is

This is a set of two 8-inch replacement wheels designed for self-propelled walk-behind mowers from MTD, Yard Man, Craftsman, Huskee, and Yard Machines. They replace OEM part numbers 734-04581 and 634-0190A.

Fitment & Compatibility

Before buying, verify three things:

• Wheel diameter: Must be 8 inches (measured across the tire, not the rim).
• Axle hole size: These fit a 3/4-inch hex axle (common on MTD-built self-propelled mowers).
• Tread pattern & width: The tire width is about 2 inches; check clearance on your mower deck.

These are aftermarket wheels, not OEM. They fit most MTD, Yard Man, Craftsman, Huskee, and Yard Machines self-propelled walk-behind mowers built after 2000. If your mower uses a 7/8-inch axle or a different drive system, these won’t work.

Key Things to Know

• Installation difficulty: Easy—just remove the old wheel clip or cotter pin, slide the wheel off, and press the new one on. No special tools needed.
• Material: Hard plastic hub with a rubber tire. The rubber is solid (no air fill), so no flats.
• Common gotcha: The hex hole may be slightly tight on some axles. Lightly sanding the axle or using a lubricant helps.
• Durability: Good for residential use, but the plastic hub can crack if you hit curbs or rocks repeatedly.

Should You Buy It

If you have an MTD-built self-propelled mower with a 3/4-inch hex axle and need a quick, budget-friendly replacement for worn or broken wheels, this 2-pack is a solid choice. It’s not for heavy commercial use or mowers with non-standard axles.