GENUINE OEM HONDA (HRN216PKAA) (HRN216VKAA) (HRN216VLAA) (HRN216VYAA) Walk-Behind Lawn Mower Engines AIR Filter Cleaner Element

What It Is

This is the genuine OEM air filter element for Honda HRN216 series walk-behind mowers (models PKAA, VKAA, VLAA, VYAA). It traps dirt and debris before they enter the engine, ensuring clean airflow for optimal combustion and engine life.

Fitment & Compatibility

• Exact fit for: Honda HRN216PKAA, HRN216VKAA, HRN216VLAA, HRN216VYAA models only. Not compatible with HRN216 other sub-models or older HRN series.
• Check your deck size: All these models use a 21-inch deck, but confirm your mower’s model number on the engine shroud or under the rear flap.
• OEM vs aftermarket: Aftermarket filters (e.g., Fram, Briggs) may fit but often have thinner foam or less seal integrity. This OEM part uses the correct density foam and pre-filter for Honda’s GCV160/170 engines.
• Physical dimensions: Roughly 5.5” x 3” x 1.5” (flat, rectangular foam element). Measure your old filter if unsure—some aftermarket “universal” filters are slightly smaller and won’t seal.

Key Things to Know

• Quality: Genuine Honda two-layer design (coarse outer foam + fine inner foam) outperforms most aftermarket single-foam filters in dust capture.
• Installation difficulty: Easy—remove the air filter cover (two clips or one screw), swap the old element, and reattach cover. No tools needed.
• Common gotcha: The foam element is oiled from the factory. Do not wash or soak it—just tap out loose debris. If you clean it, use Honda foam filter oil only; dry foam lets dust through.
• Replacement interval: Replace every 100 hours or annually (whichever comes first) in normal use. In dusty conditions, check monthly and replace sooner.

Should You Buy It

If you own one of the listed HRN216 models and want maximum engine protection with zero fitment guesswork, this is the only filter to buy. The $13.49 price is fair for OEM quality, and the 4.9 rating reflects that it lasts longer and seals better than cheaper alternatives. Avoid if you have a different HRN216 sub-model or want a multi-pack.