GENUINE OEM Honda Harmony II HRR216 (HRR2165PDA) (HRR2165VKA) (HRR2165VXA) Walk-Behind Lawn Mowers ROTARY BLADE SET

What It Is

This is a genuine OEM Honda rotary blade set designed specifically for the Honda Harmony II HRR216 series walk-behind mowers. It includes the necessary blades for standard cutting and mulching on residential lawns.

Fitment & Compatibility

• Models confirmed: HRR2165PDA, HRR2165VKA, HRR2165VXA. Also fits other HRR216 variants with the same 21-inch deck.
• Deck size: 21-inch cutting width. Measure your existing blade length to confirm—should be ~21 inches tip-to-tip.
• OEM vs aftermarket: This is genuine Honda, so fitment is exact. No adapter plates or modifications needed. Aftermarket blades may require re-drilling or balancing.
• Check your model number (on mower frame near rear wheel or under the engine shroud) to ensure the HRR216 prefix matches. If your model ends in a different suffix (e.g., HRR216K9), still verify blade shape—Honda uses both straight and curved blades across the HRR216 line.

Key Things to Know

• Quality: Honda OEM blades are heat-treated and balanced from the factory. They hold an edge longer than most aftermarket options and resist bending better than cheap steel.
• Installation: Straightforward—remove the center bolt, swap blades, torque to 35–40 ft-lbs. Use a blade removal tool or wedge a block of wood to prevent spinning. No special tools beyond a socket wrench.
• Gotcha: The blade set includes two blades. Ensure you match the orientation (cutting edge facing upward when the mower is upside down). Reversing them will cause poor cut or vibration.
• Wear indicators: Honda blades have a wear limit mark. Replace when the cutting edge is within 1/8 inch of that mark, not when dull.

Should You Buy It

Buy this if you want a guaranteed fit, factory-balanced performance, and longer blade life for your Honda Harmony II HRR216. It’s ideal for owners who prefer OEM reliability over saving a few dollars on aftermarket blades that may vibrate or dull faster. Not necessary if you’re on a tight budget and willing to measure and balance aftermarket blades yourself.