Funhoon Control Cable 946-0957 50 INCH for MTD Troy-Bilt Yard Man Yard Machines 746-0957 Throttle Cable Engine Zone Control Cable Push Walk-Behind Lawn Mowers

What It Is

This is a 50-inch control cable (model 946-0957, also 746-0957) that connects the engine throttle or zone control lever to the carburetor or drive system on push walk-behind mowers. It’s designed for MTD-built brands like Troy-Bilt, Yard Man, and Yard Machines.

Fitment & Compatibility

• Brands: Fits most MTD, Troy-Bilt, Yard Man, and Yard Machines push mowers with a 50-inch cable. Does not fit Craftsman, Honda, Toro, or John Deere.
• Measure before buying: The cable length must be exactly 50 inches (end to end, including fittings). Measure your old cable’s total length and the distance between mounting points.
• OEM vs aftermarket: This Funhoon cable is an aftermarket replacement for OEM part 746-0957. It should match the original in length, end fittings, and mounting hardware, but verify the ends (typically a Z-bend or ball joint) match your lever and carburetor linkage.
• Check your mower’s model number (found under the seat or on the deck). Cross-reference with MTD parts diagrams to confirm 946-0957 / 746-0957 compatibility.

Key Things to Know

• Quality: Generally good for the price—metal ends and a smooth-sleeved cable. Some users report the outer casing is slightly stiffer than OEM, which can affect routing.
• Installation difficulty: Moderate. You’ll need to remove the old cable, route the new one through the same path (avoid sharp bends), and adjust the tension at the carburetor or control lever. A cable cutter or file may be needed to trim the inner wire if it’s too long.
• Common gotchas: The cable may arrive with a slight coil from packaging—straighten it before installation. If your mower uses a plastic clip at the lever, the clip might not snap in as tightly as OEM; use zip ties as backup.
• Length variance: Some users report the 50-inch measurement is approximate—always test-fit before cutting or securing.

Should You Buy It

If your MTD, Troy-Bilt, Yard Man, or Yard Machines mower needs a throttle or zone control cable and you’ve confirmed the 50-inch length and end fittings match, this is a solid budget-friendly replacement. It’s not premium, but it works reliably for the price and is easy to find. Avoid if your cable is a different length or if you need a brand-specific OEM fit.