Funhoon Control Cable 532176556 52 INCH for Craftsman Murray Husqvarna 176556 162778 Throttle Cable Engine Zone Control Cable Push Mower Walk-Behind Lawn Mowers

What It Is

This is a replacement control cable (OEM 532176556 / 162778) that connects the engine governor to the throttle lever on walk-behind push mowers. It controls engine speed—from idle to full throttle—and also engages the blade brake or engine stop function on compatible models.

Fitment & Compatibility

• Brands: Craftsman, Murray, Husqvarna (also fits some Poulan, Weed Eater, and older Sears models with similar engine controls).
• Deck sizes: Typically 20–22 inch push mowers, but measure your cable length—this one is 52 inches from end to end.
• OEM cross: Replaces Craftsman/Murray part numbers 176556, 162778, and Husqvarna 532176556.
• What to check before buying:
  • Measure old cable length (end-to-end, including fittings). This cable is 52" – if yours is shorter or longer, it won’t route correctly.
  • Verify the cable ends: one end has a small barrel (for the throttle lever), the other has a Z-shaped or looped end for the engine bracket.
  • Check your engine brand (Briggs & Stratton, Tecumseh, or Kohler) – this cable works with most common engines on these mowers, but the bracket attachment point must match.
  • If your mower has a separate blade brake cable, this is not that—it controls engine speed only.

Key Things to Know

• Installation difficulty: Moderate – requires removing the old cable, routing the new one under the deck or along the handle, and adjusting tension. Basic hand tools (screwdriver, pliers) needed.
• Quality: Solid aftermarket replacement – metal inner wire with a plastic-coated outer sheath. Not as heavy-duty as OEM, but works fine for residential use. Some users report the outer sheath can kink if bent sharply during installation.
• Common gotcha: The cable may need a slight bend at the engine bracket to align properly – use pliers to gently adjust the Z-end angle. Don’t overtighten the clamp screw on the throttle lever; it can strip the plastic.
• Length check is critical: If your old cable is 48" or 54", this 52" version will be too long or too short to route cleanly. Measure twice.

Should You Buy It

If you have a Craftsman, Murray, or Husqvarna push mower with a worn or snapped throttle cable, this is a cost-effective, well-reviewed replacement that fits most common models. It’s best for DIY homeowners comfortable with basic mechanical work—just verify your cable length and end fittings before ordering.