fullas 946-05098C Throttle Choke Cable for Cub Cadet XT1 LT46 LT50 GT50 GT54, XT2 LX42 LX46 LX54, Craftsman MTD Lawn Tractor, Replace 946-05098A 946-05098B 746-05098A with 3-Position

What It Is

This is a 3-position throttle/choke cable assembly for Cub Cadet XT1, XT2, GT50, GT54, and compatible Craftsman/MTD lawn tractors. It controls engine speed (fast/slow) and choke engagement from the dashboard, replacing worn or broken cables that cause rough idle, stalling, or inability to start.

Fitment & Compatibility

Before buying, verify your model number (e.g., XT1 LT46, XT2 LX42) and deck size (42", 46", 50", 54"). This cable replaces OEM part numbers 946-05098A, 946-05098B, and 746-05098A. It fits most Cub Cadet XT1/LT, XT2/LX, GT50, and GT54 series with Kohler or Briggs & Stratton engines, plus certain Craftsman/MTD tractors using the same cable. Measure your old cable’s overall length (housing end to end) and travel distance—this cable is approximately 36-38 inches long. Check that your dash has a 3-position slot (stop/run/choke) and that the engine lever matches the cable end (typically a ball joint or Z-bend). If your tractor uses a separate choke cable, this won’t work as a combined unit.

Key Things to Know

• Installation difficulty: Moderate – you’ll need basic hand tools (screwdriver, pliers, maybe a socket set) and about 30-45 minutes. Routing the cable through the frame can be tight.
• Quality: Users report good fit and smooth operation, though the plastic housing is less durable than OEM metal on some older models. Expect 1-3 seasons of use.
• Common gotchas: The cable end may need slight bending to fit the engine lever. Double-check that the choke detent engages fully at the “choke” position. If your dash uses a different mounting bracket, you may need to reuse the old one.
• Return policy: Confirm the seller accepts returns if length or connector type doesn’t match yours – especially important for Craftsman/MTD variants.

Should You Buy It

Buy this if your Cub Cadet XT1/XT2 or compatible Craftsman/MTD tractor has a stiff, broken, or nonfunctional throttle/choke cable and you want a direct replacement without custom fabrication. It’s a solid value at $22.99 for a common repair, but double-check your model number and cable length first. Skip it if your machine uses a separate choke cable or a different dash mount style.