eXmark/Toro 30" Walk Behind OEM Blades Genuine Part# 116-6358-03 (2pack)

What It Is

This is a genuine OEM 2-pack of 30-inch walk-behind mower blades (part #116-6358-03) designed for eXmark and Toro commercial mowers. They provide a clean, precision cut for fine turf and high-use areas.

Fitment & Compatibility

• Deck size: 30-inch walk-behind mower decks only. Not for 36", 48", or other sizes.
• Brand/model: Fits eXmark 30" (e.g., LZ30, Vantage) and Toro 30" (e.g., Groundsmaster 3000, Turf Pro) walk-behinds. Check your mower’s model number and serial plate.
• OEM vs aftermarket: These are genuine Toro/eXmark factory blades – exact fit, no modification needed. Aftermarket blades may differ in thickness, hole alignment, or balance.
• Measurements: Blade length is 15.5" (from tip to center hole), center hole diameter is 5/8", and thickness is 0.190". Measure your old blade to confirm.
• Quick check: Look for the part number stamped on your current blade. If it matches 116-6358-03, these are direct replacements.

Key Things to Know

• Quality: Heat-treated, hardened steel with a durable coating for longer life. Sharp out of the box – handle with care.
• Installation: Moderate difficulty. You’ll need a socket wrench (usually 9/16" or 5/8"), a torque wrench (set to 55-65 ft-lbs), and a block of wood to prevent blade spin. Always disconnect the spark plug first.
• Common gotcha: These are not universal – they only fit 30" decks with a single-center bolt pattern. Do not use on decks with two-bolt or star-pattern mounts.
• Balance check: Even new OEM blades can be slightly off. Use a blade balancer before installing to avoid vibration and spindle wear.

Should You Buy It

If you own a 30" eXmark or Toro walk-behind and want a guaranteed fit, long life, and factory-cut quality, this pack is the right choice. It’s priced fairly for OEM (under $37 for two blades) and well-reviewed. Skip it if you have a different deck size or prefer cheap aftermarket blades that may need balancing or modification.