Exmark 103-6383-S Solid Blade Lazer Z AC AS CT XS Pioneer Vantage E S P X Series 60 Inch 3 Pack

What It Is

This is a set of three OEM solid (non-gapped) blades for Exmark zero-turn mowers, specifically designed for 60-inch cutting decks. They are intended for high-production commercial mowing where a clean, consistent cut on fine turf is required.

Fitment & Compatibility

Before buying, verify these exact points:

• Deck size: Only fits 60-inch Exmark decks. Do not use on 48", 52", or 72" decks.
• Model series: Fits Lazer Z, Lazer Z AC, Lazer Z AS, Lazer Z CT, Lazer Z XS, Pioneer, Vantage, Vantage E, Vantage S, Vantage P, and Vantage X series. Check your model number against Exmark’s compatibility list.
• Blade type: These are solid blades (no air lift notch). They will not work on decks designed for gapped (high-lift) blades. Your existing blades must be solid.
• Measurements: Each blade is 20.5 inches long, 2.5 inches wide, with a 5/8-inch center hole and a 7/8-inch blade drive washer. Verify these match your current blade.
• OEM vs. aftermarket: This is the genuine Exmark part (103-6383-S). Aftermarket equivalents may have different sharpening profiles or balance.

Key Things to Buy

• Quality: OEM-grade hardened steel with a factory-balanced edge. Expect 2-3 times longer life than cheap universal blades in sandy or rocky conditions.
• Installation: Direct bolt-on with no modification needed. Use a torque wrench to 70-90 ft-lbs (check your manual). The blade bolt is left-hand threaded on some Exmark decks.
• Gotcha: Solid blades produce less lift than gapped blades. They are not ideal for bagging or tall, wet grass. Use only for fine-cut, dry turf.
• Pack size: Sold as a 3-pack (one set for a 60-inch deck). Do not mix with other blade types on the same spindle.

Should You Buy It

Yes, if you own a compatible 60-inch Exmark zero-turn and need a factory-perfect replacement for solid blades used on manicured lawns. Avoid if you require high-lift blades for bagging or thick, damp grass. For $95.97, this is the correct OEM part for commercial-grade cut quality.