ERGIT 954-04060C Deck Belt Replacement for Troy Bilt 42 inch Deck Belt 954-04060B 954-04060 754-04060 Fits MTD Cub Cadet Troy-Bilt Craftsman Riding Mower

What It Is

This is an aftermarket replacement deck belt for 42-inch cutting decks on select MTD-built riding mowers (Troy-Bilt, Cub Cadet, Craftsman). It drives the blades from the engine pulley.

Fitment & Compatibility

• Check your deck size: Must be a 42-inch deck (not 46 or 50). Measure deck housing or confirm model number.
• OEM cross-references: Replaces OEM part numbers 954-04060, 954-04060B, 954-04060C, and 754-04060. If your original belt has a different number, measure length and width.
• Actual dimensions: 1/2-inch wide × 96.5-inch effective length. Measure your old belt (lay flat, measure end-to-end) to confirm.
• Brand fit: Fits most Troy-Bilt, Cub Cadet, Craftsman, and MTD riders with a 42-inch deck and a single-belt blade drive system. Not for zero-turn mowers or older Craftsman models with different pulley layouts.
• Deck type: Works with side-discharge and mulching decks using the standard serpentine belt routing. Check your deck’s belt diagram (usually under the deck or in the manual).

Key Things to Know

• Aftermarket quality: This is a non-OEM belt. Expect decent performance for the price, but it may not last as long as an OEM belt (typically 1-2 seasons vs 2-3). Check for fraying after heavy use.
• Installation difficulty: Moderate. You’ll need to remove the deck (or at least the belt shield) and follow the routing diagram. A belt tensioner tool helps. Allow 30-60 minutes.
• Common gotchas: The belt can be tight to install—do not pry with a screwdriver (damages belt). Use a 1/2-inch wrench to release the tensioner. Verify the belt isn’t twisted after routing.
• Measurement variance: Some users report the belt is slightly shorter or longer than OEM. If your deck has an adjustable tensioner, you can compensate. If not, consider returning and trying a different brand.

Should You Buy It

If you need a budget-friendly replacement for a 42-inch MTD deck and are comfortable with a slightly finicky installation, this belt works fine for light to moderate mowing. For heavy commercial use or if you want maximum longevity, spend more on an OEM belt. Check your old belt’s part number and length first—if it matches, this is a solid value at $14.99.