EGO Power+ Parts Fan, Bolts, Nuts and Washer Kit for Dual Blades on LM2130SP, LM2150SP and LM2160SP 21" Select Cut Lawn Mowers

What It Is

This is an OEM hardware kit from EGO that includes the fan, bolts, nuts, and washers required to install dual blades on EGO’s 21" Select Cut mowers. It’s specifically designed for the LM2130SP, LM2150SP, and LM2160SP models, enabling the “dual blade” setup that improves mulching and bagging performance.

Fitment & Compatibility

Only fits EGO 21" Select Cut mowers with model numbers LM2130SP, LM2150SP, or LM2160SP. Do not assume it works on other EGO mowers (e.g., LM2100, LM2142, or older 20" models). The kit is OEM, so no aftermarket compatibility concerns—but verify your mower’s deck size is exactly 21" and that it has the Select Cut badge (dual blade slots on the spindle). Check your owner’s manual or the underside of the deck for the model number sticker. No measurement needed beyond confirming your mower uses the same spindle pattern.

Key Things to Know

• Installation difficulty: Moderate. Requires removing the single blade and replacing it with two blades, the fan, and new hardware. Torque bolts to 50–55 ft-lbs (check manual).
• Fan orientation: The fan must be installed between the two blades, with the curved fins facing upward toward the deck. Wrong orientation kills airflow and can cause vibration.
• Hardware is one-time-use: EGO recommends replacing bolts and nuts each time you change blades. This kit includes them, so reuse old ones only if they’re undamaged (not advised).
• Common gotcha: The fan adds ~1/4" to overall blade stack height. If your deck is already tight, check clearance before tightening. Also, the fan can crack if overtightened—hand-tighten then torque carefully.

Should You Buy It

Buy this kit if you own an LM2130SP, LM2150SP, or LM2160SP and want to switch to dual blades for better mulching or bagging. It’s the only OEM solution, and the hardware is purpose-built for the job. Skip it if your mower isn’t listed, or if you’re happy with the single blade—dual blades slightly reduce runtime.