EDGER BLADE 7-11/16" HT

What It Is

This is a 7-11/16" (195mm) high-temperature (HT) steel edger blade designed for gas-powered walk-behind edgers and trimmer attachments. It cuts a clean, vertical edge along driveways, sidewalks, and garden beds.

Fitment & Compatibility

• Diameter: Exactly 7-11/16" (check your current blade size; a 1/8" difference can cause clearance issues).
• Arbor hole: Typically 1" round or 7/8" – measure your shaft before ordering. This blade fits most common edgers (e.g., Echo, Stihl, Husqvarna, Ryobi, Craftsman), but not universal.
• Thickness: Usually 0.08"–0.10" – verify your edger’s blade slot width.
• OEM vs aftermarket: This is a direct-replacement aftermarket blade. Works for most brands but check that the mounting pattern (single hole vs. 2-hole) matches your machine.
• Quick check: Remove your old blade, measure diameter and arbor hole, then compare to this spec.

Key Things to Know

• HT steel handles heat better than standard steel, reducing warping on longer runs or thick turf.
• Installation is simple: remove one bolt/nut, swap blades, and tighten to manufacturer torque (usually 30–40 ft-lbs). No special tools needed.
• Sharpness: Comes sharp but not razor-edged—fine for edging. Expect to sharpen after 2–3 seasons of regular use.
• Gotcha: This blade is not for string trimmers or brush cutters. It’s for dedicated edger heads only.

Should You Buy It

If you need a durable, budget-friendly replacement for a common gas edger and want reliable cut quality without hunting for an OEM part, this is a solid pick. Not for heavy commercial use or odd-size shafts, but ideal for homeowner maintenance.