Caltric 19 1/2 inch x 1" Circle Hole 38" Deck High Lift Blade Compatible with Snapper

What It Is

This is a high-lift replacement blade for Snapper 38-inch commercial walk-behind mowers. It’s designed for side-discharge cutting where you need strong grass lift and bagging performance, not mulching.

Fitment & Compatibility

• Deck size: 38-inch deck (Snapper models with 19.5" blade length and 1" center hole).
• Blade measurements: 19.5 inches long, 1-inch center hole (circle, not star or keyed). Blade width is typically 2.5 inches.
• OEM cross-reference: Replaces Snapper blades 1-6195, 7060195, 7050594, and others. Always verify your model’s OEM part number.
• Check before buying: Measure your existing blade length (tip to tip) and center hole diameter. Confirm your deck is 38" (not 36" or 42"). This is a high-lift blade—not for mulching decks or decks with baffles designed for standard lift.

Key Things to Know

• High lift = more power draw: This blade creates strong suction for bagging but will strain your engine more than a standard blade. Only use if your mower has enough horsepower (typically 12+ HP).
• Installation tip: Torque blade bolts to 70–90 ft-lbs. Use a blade stop or wedge to prevent rotation. Reverse threads on some Snapper models—check your manual.
• Quality note: Caltric blades are aftermarket, often made from 10-gauge steel. They’re sharp out of the box but may need balancing (check with a blade balancer before installing).
• Common gotcha: The 1" circle hole fits most Snapper spindles, but some older models use a 5/8" hole or star pattern. Measure your spindle bolt diameter.

Should You Buy It

Buy this if you have a Snapper 38" deck with a 19.5" blade and 1" round hole, and you primarily side-discharge or bag grass. It’s a solid aftermarket option at half the price of OEM, but skip it if you need a mulching blade or have a smaller engine.