Cable Length: 61 1/2"， Conduit Length: 54 1/2" 183567 Engine Brake Zone Control Cable for Craftsman AYP Husqvarna Poulan

What It Is

This is a replacement engine brake zone control cable (part number 183567) that connects the mower’s control handle to the engine brake mechanism. It’s designed for walk-behind lawn mowers from Craftsman, AYP, Husqvarna, and Poulan that use a cable-actuated blade brake/clutch or engine stop system.

Fitment & Compatibility

Before buying, verify these three things:

1. Measure your old cable. This cable has a total length of 61.5 inches and a conduit (outer sheath) length of 54.5 inches. If your existing cable is within 1–2 inches of these numbers, it will likely work. If it’s significantly different, it won’t.
2. Check your mower’s model number (stamped on the deck or under the seat). This cable is OEM-equivalent for many Craftsman, AYP, Husqvarna, and Poulan models with 21–22 inch decks. It’s not a universal fit—avoid using it on older MTD, Toro, or John Deere mowers.
3. Look at the end fittings. Both ends should match your mower’s handle and brake lever. This cable has standard barrel ends and a 90-degree conduit bend near the engine. If your mower uses a different attachment style (e.g., a loop or hook), this won’t work.

Key Things to Know

• Quality is decent for the price. The cable is zinc-coated steel with a plastic conduit, similar to OEM. A few users report the conduit can kink if bent too sharply during installation.
• Installation is moderate difficulty. You’ll need to remove the old cable, route the new one along the handlebar, and adjust the brake lever tension. Expect 20–40 minutes if you’re handy; longer if you’re not.
• Common gotcha: cable routing. The conduit must follow the exact path of the original cable—including any clips or guides—to avoid binding. If it’s too tight or loose, the brake won’t engage fully.
• Not compatible with zero-turn or riding mowers. This is strictly for walk-behind push mowers with a zone control (blade brake) system.

Should You Buy It

If you own a Craftsman, Husqvarna, or Poulan walk-behind mower from the last 15 years and your old brake cable is frayed, stretched, or broken, this is a solid, low-cost replacement. Just confirm your cable length within an inch and match the end fittings. If your mower is an off-brand or older model, measure twice—or stick with an OEM part for guaranteed fit.