Brake Cable 104-8677 for Toro 22" Recycler Walk-Behind Lawn Mower, Replacement for 290-935 1048677, Fits Models 20001 20003 20005 20009 15375 & More – High Carbon Steel Z-Bend Cable

What It Is

This brake cable (part 104-8677) is a direct replacement for the blade brake control on Toro 22" Recycler walk-behind mowers. It connects the handle lever to the brake assembly, stopping the blade when the lever is released.

Fitment & Compatibility

• OEM number: 104-8677 (also cross-references 290-935, 1048677)
• Fits models: 20001, 20003, 20005, 20009, 15375, and other Toro 22" Recycler models with a Z-bend cable design
• Check before buying: Measure your old cable end-to-end (including Z-bends). This cable uses two Z-bend ends – one at the handle lever, one at the brake arm. Verify your mower’s brake arm uses a Z-bend, not a ball-end or clevis. Confirm deck size is exactly 22" (models with 21" or 24" decks use different cables). If your mower has a plastic brake arm, this cable may not fit.
• Aftermarket note: This is a non-OEM part, but the high carbon steel construction matches OEM specs for durability.

Key Things to Know

• Installation difficulty: Moderate. You’ll need to disconnect the old cable from the handle lever and brake arm, route the new cable along the handle, and adjust tension using the barrel adjuster. Expect 15–30 minutes.
• Common gotcha: The Z-bend ends must fully seat in their slots. If they pop out during use, the brake won’t engage – double-check both connections before reassembling the handle.
• Quality: High carbon steel resists stretching better than standard steel cables, but the outer sheath can kink if you bend it sharply during routing. Avoid sharp bends near the handle pivot.
• Compatibility tip: If your mower has a “blade stop” lever (not a standard bail bar), this cable likely won’t work. Confirm your control is a simple brake lever.

Should You Buy It

If your Toro 22" Recycler’s brake cable is frayed, stretched, or snapped, this $8.99 replacement is a solid, budget-friendly fix. It’s a direct fit for the listed models, and the high carbon steel adds longevity. Skip it if you need an OEM part for warranty purposes or if your mower has a non-standard brake arm design.