Aramid Cord Lawn Mower PTO Drive Belt 5/8 x 97.25 inch for MTD 754-0485 954-0485 754-0479 954-0479, for Dixie Chopper 2006B94W, for John Deere M151276 X500 X520 Multi-Terrain Series Tractors

What It Is

This is an aramid-reinforced PTO drive belt (5/8 inch wide, 97.25 inches long) that transfers power from the engine to the mower deck on select MTD, Dixie Chopper, and John Deere tractors. It’s designed for heavy-duty cutting in residential or commercial use, particularly on multi-terrain and zero-turn models.

Fitment & Compatibility

Check these before buying:

• OEM cross-references: Replaces MTD 754-0485, 954-0485, 754-0479, 954-0479; John Deere M151276.
• Exact fit machines: Dixie Chopper 2006B94W; John Deere X500, X520, X530, X534, X540 (Multi-Terrain Series). Also fits select MTD-built brands like Cub Cadet, Troy-Bilt, and Yard-Man with 48-54 inch decks.
• Measure your old belt: Verify length (97.25 inches) and width (5/8 inch). Aramid belts run slightly tighter than rubber – if your old belt is 97.5 inches, this may be too short.
• Deck size: Typically for 48-54 inch cutting decks. Confirm your deck model if unsure.
• OEM vs aftermarket: Aramid is stronger than standard rubber but not OEM-grade. Works well for DIY replacements if OEM is unavailable.

Key Things to Know

• Quality: Aramid cord resists stretching and heat better than rubber, but it’s stiffer. Expect longer life on heavy-use decks.
• Installation: Moderate difficulty – you’ll need to remove the deck or belt guard. Aramid belts may require a belt tensioner tool; do not pry with a screwdriver.
• Common gotcha: This belt is 97.25 inches – verify your deck’s belt routing diagram. Some Deere X500 series use a 97.5 inch belt; measure carefully.
• No reviews depth: Only 1 review (5.0 stars) – limited real-world feedback. Buy with confidence only if your measurements match exactly.

Should You Buy It

Buy this if you need a budget-friendly, durable replacement for a worn PTO belt on an MTD, Dixie Chopper, or John Deere X500-series tractor with a 48-54 inch deck and your old belt measures exactly 97.25 x 5/8 inches. Skip it if you prefer OEM-branded belts or have a deck that calls for a different length.