AR-PRO (2 Pack) 15 x 6.00-6" Tubeless Tire and Wheel Assembly, Replacement Riding Lawn Mower Front Tires, Compatible with John Deere Riding Mowers and Lawn Tractor, 3" Centered Hub and 3/4" Bushings

What It Is

This is a 2-pack of 15 x 6.00-6 tubeless front tire and wheel assemblies for riding lawn mowers and lawn tractors. Designed as a direct replacement for worn or damaged front tires, it’s commonly used on John Deere models but fits many other brands with the same size and hub specs.

Fitment & Compatibility

Before buying, confirm three measurements:

• Tire size: Must be 15 x 6.00-6 (not 16 x 6.50-6 or other variants).
• Hub center: 3-inch centered hub with a 3/4-inch bushing (fits most standard front axles).
• Bolt pattern: 4 on 4-inch (four lugs spaced 4 inches apart). Measure from center of one bolt to center of the opposite bolt.

Check your mower’s model number (e.g., John Deere D100, D110, D125, E100, E110, E120, LA105, LA115, LA125, X300, X304, X310). This set is aftermarket, not OEM John Deere. It works for many other brands (Cub Cadet, Husqvarna, MTD, Craftsman) as long as the hub and tire size match. If your mower uses a 5/8-inch or 1-inch axle, these won’t fit without additional bushings.

Key Things to Know

• Quality vs. OEM: Treads are adequate for lawn use but less aggressive than some OEM tires. Fine for flat, dry grass; less ideal on wet slopes or soft ground.
• Installation: Bolts directly onto existing spindle—no special tools needed. Check that the 3/4-inch bushing is snug; if loose, add a shim or replace the bushing.
• Common gotcha: Some John Deere models (e.g., X500 series) use a 5/8-inch axle. These tires will not fit without a bushing adapter (not included). Always measure your axle diameter before ordering.
• Weight rating: Rated for front axle loads typical of residential mowers. Not for zero-turn mowers or heavy-duty commercial use.

Should You Buy It

Buy this if you need a budget-friendly, direct-fit front tire replacement for a standard residential riding mower with a 3-inch hub and 3/4-inch axle. It’s a solid value for John Deere 100/300 series and similar tractors, but skip it if your mower has a non-standard axle size or you need aggressive traction.