AR-PRO (2-Pack) 13x5.00-6 Tire and Wheel Assembly, 4-Ply Tubeless Lawn Mower Front Tire with 3" Centered Hub & 3/4" Bushings, 400 LBS Load Capacity

What It Is

The AR-PRO 13x5.00-6 tire and wheel assembly is a replacement front tire set for zero-turn mowers, lawn tractors, and riding mowers. Designed for use on smaller front wheels, these tubeless 4-ply tires handle light to medium-duty residential mowing with a 400 lbs load capacity per tire.

Fitment & Compatibility

Before buying, measure your existing tire: 13x5.00-6 means 13" outer diameter, 5" width, and 6" rim diameter. The 3" centered hub and 3/4" bushings fit many residential zero-turn mowers (e.g., Cub Cadet, Husqvarna, John Deere, Troy-Bilt). Check your spindle hole size—if it’s 3/4" or larger (with bushing), you’re good. Avoid if your mower uses a 5/8" or 1" axle without adapters. OEM part numbers vary by brand, but these are aftermarket replacements; confirm your deck clearance and bolt pattern (4-bolt, 4" on center typical). Not for commercial or heavy-duty mowers.

Key Things to Know

• Load capacity: 400 lbs per tire is fine for residential front axles, but not for rear drive wheels or heavy mowers over 800 lbs total.
• Installation: Easy bolt-on for most zero-turns—remove old wheel, slide on new one, tighten. No tire mounting needed. May require reusing your old valve stem or adding sealant if rim leaks.
• Quality: 4-ply tubeless design is puncture-resistant for lawns, but sidewalls are softer than premium brands. Expect decent life for 2-3 seasons under normal use.
• Common gotcha: The 3/4" bushing is fixed; if your spindle is 5/8", you’ll need a reducer or different assembly. Check axle length—some mowers need a spacer if the wheel is too narrow.

Should You Buy It

If you need a budget-friendly, easy swap for worn front tires on a residential zero-turn or lawn tractor, this is a solid pick. The 4.6-star rating and 400 lbs load capacity match typical needs, but skip it for heavy commercial use or if your axle size isn’t 3/4" compatible.