AR-PRO (2-Pack) 11x4.00-5 Flat-Free Tire and Wheel Assembly, 11x4-5 Solid Rib Tread Zero-Turn Mower Front Wheel, 3.4" Centered Hub, 3/4" & 5/8" Bushings

What It Is

This is a 2-pack of 11x4.00-5 flat-free (no air) tire and wheel assemblies designed for zero-turn mower front wheels. The solid rib tread provides low rolling resistance and won’t go flat, making it ideal for residential and light commercial mowers.

Fitment & Compatibility

Before buying, measure your existing wheel diameter (11 inches), tire width (4 inches), and rim size (5 inches). The centered hub has a 3.4-inch pilot hole with included 3/4” and 5/8” bushings—common on many zero-turn mowers (e.g., Cub Cadet, Husqvarna, John Deere, Bad Boy, Scag, Toro). Verify your spindle diameter is 3/4” or 5/8” and that the hub center matches your mower’s offset. This is an aftermarket replacement; OEM numbers vary, so cross-check with your manual or measure directly.

Key Things to Know

• Flat-free means heavy: Each wheel weighs about 8–10 lbs. The solid rubber adds durability but increases unsprung weight, which may slightly affect ride smoothness on rough terrain.
• No air maintenance: Good for puncture-prone areas (thorny fields, rocky yards) but can feel stiffer than pneumatics.
• Simple install: Bushings slide onto spindle; secure with existing hardware. No tire mounting or inflation needed.
• Check bearing fit: The bushings are plastic/steel—ensure they seat snugly. If your spindle is smaller than 5/8”, you’ll need additional adapters (not included).

Should You Buy It

If you’re tired of fixing flats on your zero-turn’s front wheels and want a drop-in, maintenance-free solution for residential mowing, this is a solid budget-friendly choice. It’s not for high-speed commercial use or rough terrain where ride comfort matters—stick with pneumatic if you need a softer ride.