AR-PRO 15x6.00-6 Front Tire and Wheel Assembly Compatible with John Deere 100/D100 Series Riding Mower, 3" Offset Hub, 3/4" Bushings, 4-Ply Pneumatic (1 Pack)

What It Is

This AR-PRO 15x6.00-6 front tire and wheel assembly replaces the original front wheels on John Deere 100 and D100 series riding mowers. It’s a direct-fit, 4-ply pneumatic tire with a 3-inch offset hub and 3/4-inch bushings, designed for residential lawn cutting and light-duty turf use.

Fitment & Compatibility

Before buying, confirm these specifics:

• Machine fit: Compatible with John Deere 100 series (e.g., L100, LA100, LA105, LA110, LA115, LA120, LA130, LA140, LA145, LA150, LA155, LA165, LA175) and D100 series (D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170). Also fits select Sabre, Scotts, and Craftsman models using the same 15x6.00-6 tire size.
• Hub offset: 3 inches (measured from wheel mounting face to center of tire). Measure your old wheel’s offset to avoid clearance issues with the mower deck or frame.
• Bushing size: Comes with 3/4-inch bushings (inner diameter). Verify your axle diameter—most John Deere 100/D100 series use a 3/4-inch axle, but some older or non-standard models may require a 5/8-inch or 1-inch bushing (not included).
• Tire size: 15x6.00-6 (15-inch outer diameter, 6-inch width, 6-inch rim). Check your current tire sidewall for this exact size. Do not substitute with a different diameter or width.
• Bolt pattern: 5/16-inch bolt holes on a 4-inch center (standard for this series). No adapter needed.

Key Things to Know

• Quality: 4-ply rating provides good puncture resistance for grass and light debris, but not suitable for heavy rocks or rough terrain. Expect a smooth ride on flat lawns.
• Installation difficulty: Easy—remove the cotter pin and washer, slide old wheel off, install new wheel with included bushings, and re-secure. No tire mounting or balancing required.
• Common gotcha: The 3-inch offset is critical. If your original wheel has a different offset (e.g., 2.5 or 3.5 inches), the tire may rub the mower deck at full turn. Measure before buying.
• Bushing note: The 3/4-inch bushings are pre-installed. If your axle is smaller, you’ll need to source a reducer bushing separately. If larger, this wheel won’t fit.
• Pressure: Inflate to 14–18 PSI (check your mower manual). Overinflation can cause a harsh ride and uneven wear.

Should You Buy It

If you own a John Deere 100 or D100 series mower and need a direct, no-mod replacement front tire that matches OEM specs (3-inch offset, 3/4-inch axle, 4-ply toughness), this AR-PRO assembly is a solid, affordable choice. It’s best for homeowners mowing flat, maintained lawns—not for heavy