Aeagle 461073 Electric PTO Clutch for Scag 461074 481633 48786 461397, Fits for Snapper 2650 2680S 3080 Scag SSZ-18CV-48 SSZ-20CV 48" 52" 61" Tiger Cub 40" 52" Deck

What It Is

The Aeagle 461073 is an aftermarket electric PTO clutch that engages and disengages the mower deck blades on select Scag and Snapper zero-turn mowers. It’s designed as a direct replacement for OEM part numbers 461074, 481633, 48786, and 461397, typically used on 40” to 61” decks.

Fitment & Compatibility

Before buying, verify your mower model and deck size. This clutch fits Scag models like SSZ-18CV-48, SSZ-20CV with 48”/52”/61” decks, and Tiger Cub 40”/52” decks. For Snapper, it matches the 2650, 2680S, and 3080 series. Measure your existing clutch’s shaft diameter (typically 1” or 1-1/8”) and bolt pattern (3-bolt or 4-bolt) to confirm. The Aeagle 461073 is an aftermarket part, not OEM, so check that your pulley diameter matches the original (often 4.5” or 5”). Cross-reference your mower’s serial number against Scag or Snapper parts lists to avoid fitment issues with older or non-standard decks.

Key Things to Know

• Quality concerns: With only 3 reviews and a 3.5-star rating, expect possible durability or engagement issues compared to OEM clutches. Some users report premature bearing failure after a season.
• Installation difficulty: Moderate—requires basic mechanical skill, a multimeter to test continuity, and torquing the center bolt to spec (usually 45-55 ft-lbs). You may need a puller to remove the old clutch.
• Common gotchas: The air gap between the rotor and armature plate must be set to 0.010–0.015” with a feeler gauge; too tight or loose causes slipping or failure. Also, check that the wiring harness plug matches your mower’s connector (some Scag models use a different pin layout).
• Warranty: Typically 1-year limited—keep your receipt and test the clutch immediately after install, as defects often show up early.

Should You Buy It

Buy this if you’re on a tight budget and need a quick replacement for a Scag or Snapper zero-turn with a 48”–61” deck, and you’re comfortable with basic mechanical work and potential lower lifespan. Skip it if you want OEM reliability for heavy commercial use, or if your mower has an unusual bolt pattern or shaft size—stick with an OEM unit for guaranteed fit.